Was founded in year of 2010 .With being OEM manufacturer specializing in PCB&PCBA Sensors etc with 11-year,nowadays,we have built up our strong product research and development center and we are devoting ourselves to electronics smart product. combined with the wealth of experience and expertise we have built up over the years, means we can offer a total solution to our customers one stop Service
requirements – from front end engineering through to in time deliveries.Welcome to TradeChina
24GHz microwave radar sensing module 5v no delay small angle vehicle moving object human sensing head Distance Sensor
FOB Reference Price
Purchase quantity ()
Minimum order quantity
Payment
Meorient Import & Export Co.LTD
China - Hangzhou
Trading Company
Trade Capacity
Export Percentage
Nearest Port
Hangzhou,Shanghai
Accepted Delivery Terms
Employees
5-10人
Accepted Payment Currency
USD,CNY
Average Lead Time
45 Day(s)
Certifications
Product Specifications
--Product Description
Product Description
1, product introduction.
The TD-24G-A-002 microwave sensing module can be used to detect targets with motion speeds in the range of 0.2 km/h to TO 22 km/h,to detect motion targets, to detect distances ranging from 0.1 m to 25 m, and to customize the range of measurements according to
customer needs, with an accuracy of up to 0.5 m.
2, feature description.
24GHz (ISM standard band) based on how radar works
The maximum detection distance of the motion detector is up to20 meters (the target is the moving human close to) the nearest
detection distance is customized according to the application range (the agreed sensing distance prior to the order, the default
no delay, the high-level output).
Module appearance dimensions.:25mm(L)X 25mm(W)X 12mm (H)
customer needs, with an accuracy of up to 0.5 m.
24GHz (ISM standard band) based on how radar works
The maximum detection distance of the motion detector is up to20 meters (the target is the moving human close to) the nearest
detection distance is customized according to the application range (the agreed sensing distance prior to the order, the default
no delay, the high-level output).
Module appearance dimensions.:25mm(L)X 25mm(W)X 12mm (H)
3, limit parameters.
The limit operating voltage range. | 4.5V~5.5V |
Limit operating temperature range. | -40°～ +85° |
4. Recommended working conditions.
The recommended operating voltage range. | 4.75V~5.25V |
The recommended operating temperature range. | -30°～ +60° |
5、EMC
Standard.
Pilot project.
Parameters and regulations.
IEC61000-4-2
Electrostatic discharge immunity.
+/-4.0kV(Contact discharge.); +/-8.0kV(Air discharge.)
IEC61000-4-3
Radiation immunity.
80-1000MHz,3V/m,80%AM(1KHz)
IEC61000-4-4
Electrical rapid transient pulse group immunity.
2KV,Tr/Th＝5/50ns,5kHz、100KHz
IEC61000-4-6
Conduction harassment immunity.
0.15-80MHz,3V,80%AM(1KHz)
Standard.
Pilot project.
Parameters and regulations.
IEC61000-4-2
Electrostatic discharge immunity.
+/-4.0kV(Contact discharge.); +/-8.0kV(Air discharge.)
IEC61000-4-3
Radiation immunity.
80-1000MHz,3V/m,80%AM(1KHz)
IEC61000-4-4
Electrical rapid transient pulse group immunity.
2KV,Tr/Th＝5/50ns,5kHz、100KHz
IEC61000-4-6
Conduction harassment immunity.
0.15-80MHz,3V,80%AM(1KHz)
6、Technical parameters.
Parameters. | Symbol. | The minimum value. | Typical value. | The maximum value. | Unit. | Description. |
Operating voltage. | VCC | 4.75 | 5 | 5.25 | V | Dc. |
Operating current. | Icc | 35 | 45 | mA | +5V DC | |
The emission frequency. | fstandard | 24.00 0 | 24.125 | 24.250 | GHz | |
Output power.(EIPR) | Pout | <20 | dBm | |||
Antenna parameters. | Level. | 78 | ° | |||
Vertical. | 36 | ° | ||||
Antenna gain. | Level. | 12 | dB | |||
Vertical. | 13 | dB | ||||
Operating temperature. | Top | -30 | +85 | ℃ | ||
Store the temperature. | Tst | -45 | +115 | ℃ | ||
Temperature drift. | △f TX | -1.0 | MHz/℃ | |||
Size. | L*W*H | 25*25* 6.6 | mm | |||
The input is low. | VIL | -0.3 | 1.5 | V | ||
The input is high. | VIH | 3.5 | 5.3 | V | ||
The output is low. | VOL | 0.8 | V | IIO = 10mA | ||
The output is high. | VOH | 4.0 | V | IIO = 10mA |
7.Interface definition.
The interface of the microwave sensing module PCBA is a table-mounted horizontal socket with a pitch of 1mm
The interface of the microwave sensing module PCBA is a table-mounted horizontal socket with a pitch of 1mm
Serial number. | The pin name. | Input/output. |
1 | +5V | Power input. |
2 | Signal | Level signal output. |
3 | IO_input | Depending on the input level, different detection distances can be set. |
4 | GND | The power supply. |
Design specification and material selection of enclosure
During installation, the shell cannot be made of metal materials or metal layers; non-carbon-containing plastic materials or
plastic foams can be used. The right way
When the shell is made of plastic materials (ABS, PVC, etc.), the thickness and space of the shell must be correctly estimated,
and the antenna must be wrapped in a way that does not directly contact the radar antenna structure;
When using foam materials (such as Stypopor or similar materials) for the shell, ensure that the relative dielectric constant of
the material is close to 1
Wrong way
Wrap the antenna with metal foil or some metal parts;
Spray the antenna structure with any kind of paint or varnish;
Wrap the antenna with CFK sheet (conductive);
The plastic material is in direct contact with the corroded antenna structure (has a higher dielectric constant effect on the
resonant frequency of the patch). Recommended shell size
For the 24GHz radar, based on experience, the shell can be made of plastic material with a thickness of about 3mm and keep a
distance of about 6mm from the surface of the radar antenna.
If a thicker plastic material is used, the increase in insertion loss must be considered; at the same time, an overly thick shell
may affect the antenna pattern.
When it is necessary to potting the microwave induction module PCBA, as shown by the red arrow in the figure below, the width of
the step where the PCBA is stuck on the inner wall of the shell should be between 2.5mm and 3mm to prevent the glue from leaking
from the bottom of the PCBA during potting, and the shell should It can be placed steadily and is convenient for mass production
of glue. The screw holes are of appropriate size and not easy to slip.
During installation, the shell cannot be made of metal materials or metal layers; non-carbon-containing plastic materials or
plastic foams can be used. The right way
When the shell is made of plastic materials (ABS, PVC, etc.), the thickness and space of the shell must be correctly estimated,
and the antenna must be wrapped in a way that does not directly contact the radar antenna structure;
When using foam materials (such as Stypopor or similar materials) for the shell, ensure that the relative dielectric constant of
the material is close to 1
Wrong way
Wrap the antenna with metal foil or some metal parts;
Spray the antenna structure with any kind of paint or varnish;
Wrap the antenna with CFK sheet (conductive);
The plastic material is in direct contact with the corroded antenna structure (has a higher dielectric constant effect on the
resonant frequency of the patch). Recommended shell size
For the 24GHz radar, based on experience, the shell can be made of plastic material with a thickness of about 3mm and keep a
distance of about 6mm from the surface of the radar antenna.
If a thicker plastic material is used, the increase in insertion loss must be considered; at the same time, an overly thick shell
may affect the antenna pattern.
When it is necessary to potting the microwave induction module PCBA, as shown by the red arrow in the figure below, the width of
the step where the PCBA is stuck on the inner wall of the shell should be between 2.5mm and 3mm to prevent the glue from leaking
from the bottom of the PCBA during potting, and the shell should It can be placed steadily and is convenient for mass production
of glue. The screw holes are of appropriate size and not easy to slip.
Company Profile
Certifications
Feedback From Customers
Shipping & Payment
FAQ
1, Can you provide free samples?
Yes , Free samples is available , you just need to pay for the shipping cost.
2, What is your MOQ ?
Normally , 100m per a color or size.
3, What is your payment terms?
Payment amount ≤ 100USD , 100% in advance ; payment amount ≥ 600USD , 30%T/T in advance ,balance before shippment.
4, How about your quality?
Try a small order , you will have a judgement.
5, How can we get my order ? How can we know you have sent the goods?
We will send you the goods by UPS,DHL, TNT,Fedex,Oversea shippment or other forwarder, all with tracking number.
No desirable products?
Sourcing assistant>
How to start your business
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier