CAMC brand Dump Truck
Specification |
|
Chassis |
|
Parameter |
|
Overall dimension(mm) |
9800×2500×3500 |
Kerb mass |
12500kg |
Number of axle |
3 |
Tread (mm) |
2,065/1,860/1,860 |
Wheelbase (mm) |
1850+3370+1350 |
Min.ground clearance (mm) |
255 |
Crew |
2 |
Payload |
Front: 7500kg Rear: 16,000kg x2(Ben-z Technology Ratio:5.263) |
Max. Speed (km/h) |
75 |
Max. Grade ability (%) |
30 |
Engine |
|
Model |
CAMC CM6D18 385 31 |
Type |
Designed By A-VL company,Germany technology, Bos-chand Wab-co air compressor , Manufacture in camc |
Max. Power |
283kw/1900 |
Max. T Qrgue |
1760Nm/1,250 |
No. of cylinder |
6 |
Bore x Stroke |
118mmx150mm |
Displacement |
9.84L |
Controller type |
ME-CH |
Axles |
|
Front |
Stub axle with double T-cross section Capacity: 7,500KG |
Rear |
16T,Double reduction with hub reduction and final drive ratio: 5.263 |
Capacity |
2×16,000KG(11.00R22.5 Steel tyre) |
Brake system |
|
Service |
Full Air Brake, Dual circuit |
Parking |
Spring actuator at rear wheels |
Auxiliary |
Exhaust brake |
Fuel Tank (Mounted on offside of the frame) |
|
Capacity |
380L |
Material |
galvanized steel |
Steering |
|
Driving position |
Left or Right hand drive only |
Type |
Power steering |
Suspension |
|
Front suspension |
tapered leaf spring 9 semi-elliptic leaf spring |
Rear suspension |
tapered leaf spring 12 semi-elliptic leaf spring |
Clutch |
|
Brand |
Sa-chs or Va-leo |
Type |
Hydraulic control with air assisted |
Plate diameter |
ry single plate with diaphragm 430 |
Electrical System |
|
Batteries |
2*12 Volt – 150 AH*2 |
Alternator |
24 Volt/70A |
Starter |
24 Volt/7.80kw |
Frame(mm) Type |
Parallel, tapered channel section type with Reinforcements, stiffeners and cross members |
Size (HxW) |
310*90(8+8),double frame |
Width (front/rear): |
976/856 |
Upper |
|
Tipping type |
Front tipping type |
Tipping system |
Complete set of Chinese famous brand hydraulics system |
Dump Body Size(mm) |
7000X2300X1500 |
Thickness |
Side:5mm in high tensile strength steel Q345/B(High strength Steel) Side:5mm in high tensile strength steel Q345/B Bottom:8mm in high tensile strength steel Q345/B |