220v to 36V 2.5amp LiFePo4 battery charger for cars
220v to 36V 2.5amp LiFePo4 battery charger for cars
PART1. FEATURES
1. AC input: AC: 85-264v wide range input, 47 to 63Hz
2. Output power:120W
3. DC output voltage:12V/6A, 24V/4A, 36V/2.5A, 48V/2A, 60V/1.5A
4. LED indicator light logo: red and green, double color instructions, red charging green finished or standby
5. Efficiency: >85%
6. MTBF: 30000 hours
7. Main export markets: Asia/Eastern Europe/Mid East/Africa/Australasia/North America/Central/South America/Western Europe
PART2. SUITABLE TYPE OF BATTERY
1. Lithium battery charger for LiFePO4 Battery , Li-ion Battery , Li-polymer battery
2. Lead acid battery charger for AGM Battery , GEL Battery , Silicon battery
PART3. CHARGING CURRENT SELECTION
Lithium battery charge current = Battery capacity *0.3C~2C.
Lead acid battery charge current = Battery capacity *0.12C~0.15C
For example
Lithium battery 200AH , The charger current can select : 200*0.3C~2C, that is 60A ~400A
Lead acid battery 200AH , The charger current can select : 200*0.12C~0.15C, that is 24A ~30A
PART4. 180W CHARGER MODEL SELECTION
Model | Output Voltage | Constant Voltage | Constant Current | NW/KG | Dimension/mm |
YK-BUY120-1206 | 12V | 14.6V | 6A | 0.7 | 135*90*50 |
YK-BUY120-2404 | 24V | 29.4V | 4A | 0.7 | 135*90*50 |
YK-BUY120-362.5 | 36V | 43.7V | 2.5A | 0.7 | 135*90*50 |
YK-BUY120-4802 | 48V | 58.8V | 2A | 0.7 | 135*90*50 |
YK-BUY120-601.5 | 60V | 67.2V | 1.5A | 0.7 | 135*90*50 |
PART5. SPECIFICATION
INPUT | |
Input range | AC: 85-130v/180-264v (Pull switch) |
Frequency | 47-63hz |
Input fuse | 4A |
Inrush current | Cold start 43A (220Vac Input) |
Input Current | Max 2.8A |
Efficiency | 86% |
Leakage current | <0.75mA |
Isolated | Input to output : 1500Vac 50hz 1min ≤10mA Input to case :1500Vac 50Hz 1min≤10mA Output to case :500Vac 50Hz 1min≤10mA |
OUTPUT | |
Voltage setting accuracy | +/-1% (100/264Vac input) |
Total output voltage adjustable rate | 1% |
Ripple | 250mVp-p Main output (board edge) Test with adding 0.1Uf ceramic capacitor and 10Uf tantalum capacitor filter at the output and the bandwidth is 20Mhz |
WORK CONDITIONS | |
Operation temperature | -15℃ to +60℃ |
Storage temperature | -40℃ to +80℃ |
Operation humidity | 5% to 95% RH Non-condensing |
Fan noise | ≤55Db |
Max Altitude | 10000m |
Cooling | Use of forced air cooling system. Under dustless and ventilated conditions, the full load temperature rise not exceeding 40℃. |
PROTECTION | |
Short-circuit protection (SCP) | Yes, Relay off, no output |
Over-current protection(OCP) | Yes, Disconnected the output The charger enter the standby state protection , when output current exceeds the max charging current |
Over-voltage protection | Yes, PWM OFF The charger enter the standby state protection , when output voltage exceeds the max charging voltage |
Reverse Polarity Protection | Yes, Relay off, no output |
Over-temperature protection | Yes, when the internal temperature over 85 degrees, the charge stop working and the temperature drop, the charger automatic recovery |
BATTERY CHARGER FOR CARS
LiFePo4 battery charger for cars
1. Input AC Voltage : 85-264Vac | 85-130Vac | 180-2640Vac Optional
2. Output DC Voltage: 12 | 24 | 36 | 48 | 60 | 72 | 84 | 96Vdc
3. Output Current : 0.5A to 200A
4. Output Power : 50w to 2000w
Input Voltage | Output Voltage | Output Current |
85-264Vac | 12V | 6|8A |
85-130Vac | 10|20|25|40|50|60A | |
180-264Vac | 10|20|25|40|50|60A | |
85-264Vac | 24V | 4|5A |
85-130Vac | 7|12|18|25|30|45A | |
180-264Vac | 7|12|18|25|30|45A | |
85-264Vac | 36V | 2.5|4A |
85-130Vac | 5|8|12|20|25|30|40A | |
180-264Vac | 5|8|12|20|25|30|40A | |
85-264Vac | 48V | 2|3A |
85-130Vac | 4|6|10|15|20|25|30A | |
180-264Vac | 4|6|10|15|20|25|30A | |
85-264Vac | 60V | 1.5|2.5A |
85-130Vac | 3|5|8|12|15|20|30A | |
180-264Vac | 3|5|8|12|15|20|30A | |
85-264Vac | 72V | 2A |
85-130Vac | 2.5|4|6|10|12|16|25A | |
180-264Vac | 2.5|4|6|10|12|16|25A | |
85-130Vac | 84V | 5|9|10|14|18A |
180-264Vac | 5|9|10|14|18A |
LiFePo4 battery charger for cars
LiFePo4 battery charger for cars
LiFePo4 battery charger for cars
We provide 12 months warranty for 220v to 36V 2.5amp LiFePo4 battery charger for cars
1, If the item is defective , please notify us within 7 days of delivery.
2, All the items must be returned in original condition, in order to quality for a refund or exchange of goods.
3, Items returned after 15 days of delivery are only eligible foe repair.
4, The buyer is reponsible for all shipping cost when buying , it means the buyer have given tacit consent to the policy.
5, If further details, please feel free to contact us , we will work with you to reach win-win situation.
Please send your inquiry details to Taylor in the below, then click " Send " now
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier