220v ac to dc 12v 300 amp adjustable power supply 3600w

220v ac to dc 12v 300 amp adjustable power supply 3600w

 12v 300 amp power supply

(1) Input voltage (on demand)

Single-phase AC220V/AC110V + / - 15%; 50 hz \ 60 hz

Three-phase AC380V AC220V / + / - 15%; 50 hz \ 60 hz

(2) The output voltage can be adjustable range (0 ~ 3000V).

(3) The output constant current value can be adjusted range (0 ~ 2000A).

(4) Adjustment rate of source voltage: stable pressure is less than 0.5%; Load adjustment rate: stable pressure is less than 1%; Constant flow is less than 2%.

(5) Ripple voltage: total ripple voltage Vpp is less than 2%; Machine efficiency: > 89%.

(6) Number display: output voltage: display accuracy plus or minus 1.2%; Output current: display accuracy plus or minus 1.5%.

(7) The output voltage is overcharged: the maximum output is less than 2%.

(8) Low insulation resistance: the input - output:≥20 MΩ; Input - casing: ≥20 MΩ; output - casing:  ≥20 MΩ.

(9) Strength of insulation: input - output: AC1500V, 10mA, 1 minute.

(10) Input - chassis: AC1500V, 10mA, 1 minute;

(11) Output - case: AC1500V, 10mA, 1 minute.

(12) Low engine overheating protection threshold temperature: 75 ~ 85 ℃.

(13) Average failure time: greater than 50000h.

1.Small size, light weight, high efficiency (89% above), wide isolation, wide input range (maximum 20%).

2. Provide protection against surge protection and avoid the instantaneous current overshoot.

3.The output voltage current can be adjusted in a wide range, so that users can use it flexibly.

4.The output voltage current and high brightness digital tube display, clean and intuitive.

5.The reliability of the whole machine is improved by overpressure, overflow, underpressure, overheat, etc.

6.In order to achieve higher power output, automatic equal-flow technology can be used for multi-machine parallel expansion.  

 12v 300 amp power supply is widely used in industrial control, electronic power, electroplating, communication, scientific research, instrument, military, medical, ship, railway and other high-tech fields.

The details are as follows:

1. Motor: electric motor, electric vehicle controller, dc motor test, etc

2. Electric tools: LED test and aging, energy-saving bulb testing and aging, lamp testing, tungsten gasification, etc

3. Automobile: automobile electronics, high power dc motor, automobile motor controller, car lighting, cigarette lighter, automobile audio and video, etc

5. Electronic devices: capacitors, resistors, relays, transistors, sensors, etc

6. Display: display screen, liquid screen, touch screen, on-board DVD, mobile phone display, etc

7. Electrochemical class: electrolysis, electroplating, anodic oxidation, nonferrous metal research, etc

About  the  12v 300 amp power supply, We can customize different kind of specification according to your request. Such as:
(1)Input voltage: 1 phase 110VAC/220Vac or 3 phases 380Vac;

(2)Output voltage: 0-3000V variable or appointed; 

(3)Output current: 0-2000A variable or appointed.

(4)Serial port: RS232,RS485,timing switch.

Operation-- 12v 300 amp power supply

1. Before connect with loads, please preset the needed output voltage, or check the output voltage is suitable or not, or adjust the voltage potentiometer and current potentiometer to minimum.
2. Please connect with loads when POWER OFF. Then turn Power ON. Turn the Voltage potentiometer, current potentiometer to minimum at first. After power supply machine works steadily, then adjust the needed output voltage which can avoid the overshoot voltage to damage the loads equipments.
3. In running status, you can adjust the voltage potentiometer, current potentiometer to change the output voltage and output current as you need.
4. Internal fan is temperature-control, only when high temperature, the fan will work, when low temperature the fan will stop.
5. Internal radiating wind hole: left-in and right-out, please make sure there is no barrier in the left and right wind hole.