Ceramic Band heaters are are used in plastic processing industry for keeping the nozzles of injection molding machines hot. Nozzle heaters are manufactured from high quality mica sheet or ceramic, and have Nickel Chrome resistance. Nozzle heaters are covered by metal sheathing & can be rolled to the required shape. Band heaters operate efficiently when the sheath temperatures are kept below 280 degree centigrade. If this temperature is maintained, the life of the band heaters gets long.
Technical Data Of Ceramic heating ring:
Sheath Material | Chrome Nickel Steel |
Insulators | High Grade Steatite Ceramic Insulators (High temperature) |
Heat Saving Thermal Insulation | Ceramic Fibre (std.) |
Heating Elements (coil) | NiCr 60:16, NiCr 80:20 |
Nominal Wall Thickness | Premium Heat : ½" Power Saver : ½" + 5/8" (Outer Insulation) Power Saver PLUS :½" + 1.5" ( Outer Insulation) |
Connection | Fiber Glass Insulated- Metal Braided Flexible Cable (std. 12" long) mounted on rigid screw post terminals |
Voltage Range | 110V - 440V, Single |
Surface Loading | 35-55W / inch2 (depending upon model & application) |
Power Rating | Depending upon application |
Power Tolerance | ± 10% |
HV Testing | 1.5 Kv between heating element and sheath |
Insulation Resistance (Cold) | < 20 MΩ |
Sheath Temperature | Up to 500°C maximum (Chrome Nickel Steel sheath) |
Gap Between the Clamping Edge | 5 - 10mm |
Resistance | +/- 10% |
Width : | Minimum 30mm and there after multiples of 15mm. Minimum 100mm in case of Power saver & Power Saver PLUS |
Inner Diameter | Minimum 50mm Minimum 75mm incase of Power saver & 100mm for Power Saver PLUS |