20ml to 2000ml Teflon Lined Hydrothermal Synthesis Reactor with Stainless Steel Shell

Hydrothermal synthesis reactor

also called pressure vessel, dissolved vessel or hydrothermal synthesis autoclave

Volume available:

20ml 30ml 50ml 75ml 100ml 200ml 400ml 500ml 1000ml 2000ml

1. Product Features: 
1.1 This product is a simple and fast experimental equipment. It is mainly used for reaction of small amount of materials. According to the materials proportion and response time differences, it can achieve a variety of reactions which helps users obtain expected experimental data in a short time. 
1.2 It’s hard to add conventional stirring system because of relatively small volume. There’s rotating shaft and motors controlled by inverter in the incubator box. The hydrothermal synthesis reactors are fixed on the rotating shaft by clamp, which changes the static reaction to rotating function, to improve reaction effect.

2. Components

(1) Jack screw bolt

(2) kettle cover

(3) Butterfly spring pad

(4) Flat Head 
(5) Lining cover

(6) Liner

(7) Bottom cover

(8) Kettle body 

3. Product Category:
Volume: 20ml ~500ml

Material:stainless steel SS304 SS316,hastelloy, titanium, cladding plate

The design temperature of this product is 300 °C, design pressure 6Mpa.
There are two types of working temperature according to the different liner in the hydrothermal synthesis reactor. 
3.1 If the liner is teflon ( also caleed PTFE,F4), then the working temperature ≤ 160 °C, long time working temperature of 160 °C.
3.2 If the liner is PPL, the temperature ≤ 250 °C, long time working temperature of 250 °C.

4. Methods of operation (Wear protective gloves in operation):

4.1.    Loose hexagon head bolt with a wrench, do not have to unload and just move freely.

4.2.    The screw cap is screwed down, and then turn to the 304 filter pad , 304 cover and PTFE cover to be taken down.

4.3.    Withstand up the 304 bottom, then remove the 304 PTFE liner from upper part of the kettle.

4.4.    Place the reaction materials inside the PTFE liner, and ensure that feeding coefficient is less than 0.8.

4.5.    Put PTFE liner with reaction materials into the 304 kettle body, and then turn to put on PTFE cover,304 cover, 304 filter pad, then tighten the screw cap, and finally tighten the hex head bolt with a wrench.

4.6.    Fix the micro reactors in blast / thermostatic oven, pending the completion of the reaction to remove micro-reactors.

4.7.    After cooling the micro-reactor, repeat the steps 1-3

4.8.    Transfer the reaction products to the specified container, then wash PTFE liner and PTFE cover for the next use.

5. Package

6. Work shop and Equipment

7. Polishing Equipment and Effect

8. Testing Instrument

9. After Sale Service

We will give advices and suggestions to user according to the needs of various industries: provides various product standards, raw materials, inspect and test methods, standard and technology consultation according to user requirements; provides manufacturing according to buyer's requirements, customizing of non-standard product, such as ultra short / long series; provides company qualifications and credit proof etc.

We will provide reactor routine maintenance as well as training service for troubleshooting of common faults; provides remote or on-site reactor review, installation and operation technical guidance; for customer quality complaint, after technical support by telephone, professional customer service personnel will arrived at the scene * if any further service is required; user's technical quality consultation will be replied within 24 hours; 12 months of product warranty period is provided; provide 24 - hour technical support hotline; provide various forms of after sale service for free during the warranty, provide life time after sale service and limited supply of free wearing parts for three years. 

Welcome inquiry and hearty cooperation.