original 20A 30A 40A ESC Speed Controler Rc FPV Quadcopter Frame ESC For Rc Planes Remote Control Drone

1. Hardware parameters

Continuous / peak current: 20A/25A

 Number of battery cells: 2-3S LiPo

BEC output: linear mode: 5V, 2A

2. Wire and plug

A. Power cord: red-16AWG-100mm*1; black-16AWG-100mm*1

B. Output line: blue-16AWG-75mm*3

C. Power plug: T head

D. Output plug: 3.5 gold plug (female)

1. Hardware parameters

Continuous / peak current: 30A/40A

Number of battery cells: 2-3S LiPo

BEC output: linear mode: 5V, 2A

2. Wire and plug

Power cord: red-16AWG-100mm*1; black-16AWG-100mm*1

Output line: blue-16AWG-75mm*3

Power plug: T head (can be customized as required)

Output plug: 3.5 gold plug (female)

1. Hardware parameters

Continuous / peak current: 40A/55A

Number of battery cells: 2-3S LiPo

BEC output: linear mode: 5V, 3A

2. Wire and plug

Power cord: red-16AWG-100mm*1; black-16AWG-100mm*1

Output line: blue-16AWG-75mm*3

Power plug: T plug (can be customized as required)

Output plug: 3.5 gold plug (female)

Use small science:
Some players picked up the ESC and installed it directly on the plane. As a result, they heard the beeping, the motor just didn't rotate, or the speed couldn't go up. The reasons are as follows:
To use the ESC for the first time, you need to identify the maximum travel and minimum travel of the remote control. The method is as follows:
Connect the ESC to the motor----connect the ESC cable to the receiver-----turn on the remote control and push the throttle to the highest point----plug the ESC to the battery----- -Listen to the sound----di---didi-----after three beeps, pull the throttle stick to the lowest point----heard three beeps of didi------OK
The three wires of the brushless ESC can be connected arbitrarily. If the steering is wrong, you can adjust any two of them.