Welcome to TradeChina
2021 Physiotherapy shoes/tens massage slipper with CE certification
FOB Reference Price
Purchase quantity ()
Minimum order quantity
Payment
Meorient Import & Export Co.LTD
China - Hangzhou
Trading Company
Trade Capacity
Export Percentage
Nearest Port
Hangzhou,Shanghai
Accepted Delivery Terms
Employees
5-10人
Accepted Payment Currency
USD,CNY
Average Lead Time
45 Day(s)
Certifications
Product Specifications
--Product Description
2021 Physiotherapy shoes/tens massage slipper with CE certification
Products Description
How to use
Step 1:Place the electrode pads on the body(Note: 2 electrode pads / 4 electrode pads must be connected at the same time)
Step 2:Connect the electrode pads to the electrode wires and connect to the device
Step 3:Start the device, set the mode, and adjust the gear
Features:
Out put of 2 channels -A & B can be used to treat various parts of the body simultaneously.
You can choose any of the treatment modes Shoulder/waist/joint/button/foot)
The product is specially designed for lessening pain in muscles.
The apparatus can produce curative effect particularly to the patients suffering from the pain in neck, back, loin and various joints.
The exclusively designed program consists of different waves through alternative composition, giving a feeling of manual massage by hand.
The soft and gentle pulse can improve the blood circulation and promote main and collateral channels unblocked and give a special effect on releasing fatigue.
Use kw305 pulse massager for: Stiffiiess of shoulders.
Paralysis of peripheral nerves. Recovery of fatigue. Improves blood circulation neuralgia.
Gradual release of muscular pain.
Button description: Total 13 buttons:
1. "Shoulder" button: suit for massage on shoulder and back. Press speed "+T-" button to adjust the intensity. And speed is automatically reduced or increased. It takes 30 minutes to complete a ftill treatment. Transfer mode per 5 minutes ( PRESS->RUB->V1BRATE->THUMP).
2. "Waist" button: designed for waist massage. Waist massage state will be shown on screen. And change mode per 5 minutes (PRESS->RUB->VIBRATE->THUMP). Press speed "+T-" button to adjust the intensity.
3. "Joint "button: designed for joint massage, change mode per 5 minutes!PRESS->RUB->VIBRATE->THUMP), Press speed "+"/ button to adjust the intensity
4. "Hand&Foof button suitable for hand and foot massager. The state of hand and foot massage state can be changed per 5 minutes. Total 4 modes(PRESS->RUB->VIBRATE->THUMP).
5. "Leg,,Button: adjust to leg massage. Massage mode change every 5 minutes Press speed button to adjust the intensity. And speed is automatically reduced or increased.
6. Repeat button: It is useful onlv under the state of above 5 states press
this button to repeat above 5 different massage function.
7. The massage time displayed on screen
8. The massage speed displayed on screen.
9. Speed & Intensity: both include high(+) & low(-) button. Press high
button to increase grade. Press Low button to reduce grade.
10. "Thump "button: Press it to start to thump massage.
11. "Vibrate" button Press it to start to vibntion massage.
12. "Rub" button: Press it to start to rub massage.
13. "Press "button: Press it to stert to press massage.
14. ON/OFF: turn on the button to start the device, turn off to stop
working.there are 8 grades for electronic intensity.
preparing & setting the electrodes:
I. Correctly connect the electrode cord to the electrode pads
2. Insert the plug of the electrode cord into the unit' electrode jack.
3. Pell off the film from the electrode pads.
4. Use a damp towel to wipe the area of skin on which you will be affixing the pads to remove any oil, cosmetic or dirt.
5. Should the electrode pads be soiled, both their adhesiveness and the number of times of possible use will be reduced.
6. Apply the electrode pads to the area of the body you wish to massage. The unit can't operate unless both pads from at least one change are applied.
No stimulation at all.
1. Are the pads and the cord connected properly?
Check the connection to make sure it is correct.
2. Are the electrodes set properly?
See before instructions on how to set them properly
3. Have the batteries run down?
If so, replace them with new ones.
4. Are the batteries installed properly?
See before instructions on how to insert them properly.
The display and treatment mode light up but there is no stimulation
1. Are the electrodes set properly?
The power to the connected channel automatically turns off approx. 10 seconds if one of the two electrode pads is removed from the skin, Therefore, set them closely to your skin.
2. The Intensity level is at what position?
Press on the intensity control button and stop at a point where there is moderate stimulation.
3. Are the electrode pads overlapping?
Affix the pads so that they do not overlap in any way.
Weak stimulation:
1. Are the electrode pads overlapping?
Affix the pads so that they do not overlap in any way.
2. Are the pads and the cord connected properly?
Check the connections to make sure they are correct.
3. Are the electrodes set properly?
See before instructions on how to set them properly.
Neither the display nor the treatment modes lights up when the power is turn on.
1. Have the batteries run down?
When the batteries run down, the unit automatically turns off.
Replace the batteries with new ones.
2. Are the batteries correctly installed?
See before instructions on how to insert them properly.
Skin turns red.
1. Is the treatment time too long?
Limit your treatment time to 10-15 minutes
2. Have the pads dried?
Wet the surface of the pads and try again. If that does not solve the problem or if the pads are quite soiled, replace them with new ones.
3. Are the pads affixed firmly?
Set them so that they fit closely to your skin.
Recommend Products
Company Profile
Amazon FBA Service
Certifications
FAQ
Q1.Are you a manufacturer?
Yes,we have our own factory in Shenzhen.
Q2:what about the lead time of sample time and mass production?
Usually,2 days for sample order,3-25 days for bulk order depends on your order quantity.
Q3:Can your products pass CE/ROHS/ Certificate?
Yes,our products meet the industrial standards,like CE/ROHS/FCC/510(k)
Q4.Can you offer any help to develop a new item for us?
It is our pleasure to take part in your new project,our professional technical team vill provide the support and any other we can
do.
Q5.How can I get a sample to check your quality?
Trial order or sample order is accepted.After price confirmation,you can require for samples to check our quality.If you just need
a blank sample to check the design and production quality,we will provide you the sample with your payment,the freight by buyer.
Q6.What is your payment terms and shipping method:
We accept T/T,Weaterm Union,PayPal.By sea for large quantity order,By air for small quantity order.
Q7.Do your products come with warranty?
A.Yes,we promise 1-3years warranty according to diferent model.
Yes,we have our own factory in Shenzhen.
Q2:what about the lead time of sample time and mass production?
Usually,2 days for sample order,3-25 days for bulk order depends on your order quantity.
Q3:Can your products pass CE/ROHS/ Certificate?
Yes,our products meet the industrial standards,like CE/ROHS/FCC/510(k)
Q4.Can you offer any help to develop a new item for us?
It is our pleasure to take part in your new project,our professional technical team vill provide the support and any other we can
do.
Q5.How can I get a sample to check your quality?
Trial order or sample order is accepted.After price confirmation,you can require for samples to check our quality.If you just need
a blank sample to check the design and production quality,we will provide you the sample with your payment,the freight by buyer.
Q6.What is your payment terms and shipping method:
We accept T/T,Weaterm Union,PayPal.By sea for large quantity order,By air for small quantity order.
Q7.Do your products come with warranty?
A.Yes,we promise 1-3years warranty according to diferent model.
Contact US
Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine
PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.
No desirable products?
Sourcing assistant>
How to start your business
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier