FAKRA series connector optional color:
A/B/C/D/E/F/G/H/I/K/Z/L/M/N
Mounting type:
Cable connector(straight/right angle)
Panel connector
PCB connector
Adapter
(i) Materials
Center contact: Brass, Copper berylium or Bronze
Outer contact: Brass, Diecast
Spring washer: Stainless steel
Crimp ferrule: Copper, Brass
Insulator: PTFE/PE/SPS
(ii) Electrical
Impedance(ohm): 50
Frequency range(GHz): 0~6 for 50 ohm
Return loss: ≥18 dB typical
Insertion loss at 4 GHz≤0.1 dB
Dielectric withstanding voltage(V): 750 rms at sea level
Working voltage(V): ≤335 rms max.
Insulation resistance: ≥1G MΩ
Center contact resistance: ≤5.0 MΩ(Millliohms max.)
Outer contact resistance: ≤2.5 MΩ(Millliohms max.)
Current carrying capacity: ≤1.0 A DC
RF leakage: >55 dB
(iii) Mechanical
Engagement force(with or without latch): 25 N max.
Engagement force(with latch): 100 N min.
Disengagement force(without latch): 2 N min.; 25 N max.
Mating durability: ≥50
(iv) Environmental
Temp. range: IEC 68-2-2; -40℃ up to 105℃
Humidity(Cyclic): IEC 68-8-30
Vibration: IEC 68-2-64
Coupling nut retention: 100 lbs. min.
Necessary information:
i. FAKRA color
ii. mounting type
iii. Operating frequency, VSWR and insertion loss
Others:
You could option color of heat shrink tubing or other requirements
FAKRA series connector commonly is used for Automotive GPS, GPS antenna, GSM antenna, cable assembly, telecommunication, aero and more.