2021 Hot Sales Jewelry Sterling Silver Gold Stainless Steel Laser Cutting Machine Factory Price
Gold Jewelry Sterling Silver Laser Cutting Machine
Parameters:
| Model | SW-FLC1000 | SW-FLC1500 |
| Output power | 1000W | 1500W |
| Laser wavelength | 1070nm | 1070nm |
| Laser source | Fiber laser source | Fiber laser source |
| Cutting area | 300×200mm | 300×200mm |
| Cutting speed |
500-5000mm/minute |
500-5000mm/minute |
| Cutting line width |
0.04-0.08mm(depends materials thickness) |
|
| Cutting accuracy | 0.01mm | 0.01mm |
| Power supply |
AC220V,single phase |
AC220V,single phase |
| Rated power | ≤6KW | ≤8KW |
| Cooling system | water cooling | water cooling |
|
Environmental conditions |
No vibration source, good ventilation, temperature 5 to 35 degrees |
|
Introduction:
The laser cutting machine is customized for imported laser source and cutting heads according to the jewelery industry, as well as excellent quality of laser beam,suitable for cutting pure gold, 9K-24K gold, 925 silver, sterling silver and other precious metals.These metals are highly reflective materials for laser beams, low laser absorptivity, strong reflectivity, and can not be processed by ordinary laser devices.Unique optical design, adding high-reflective laser isolator, makes our SW-FLC800-Gold series of laser cutting machine can easily cut pure gold, silver and other high-reflective material, and not easy to damage the laser.The latest generation of fiber lasers' photoelectric conversion efficiency up to 30%, It is the traditional YAG lamp pump Laser 10 times.While electricity consumption is only one-third to one-fifth that before.The laser does not have supplies, no need to replace the lamp.
High-precision jewelry laser cutting system combine the integration of the layout with sorting function.Cutting fine,and the material can be used of maximization.At the same time making the loss greatly reduced.The cutting system supports: DXF, AI, PLT and other commonly used drawing format, support crossed, lettering function.Also you can choose the rotating shaft, and then this material(like bracelets, rings, round pipe and so on) could be cut easily.
As gold and silver materials are very valuable, so we designed a professional dust and dust recovery device.Unique sealed design to prevent the loss of gold powder, which makes the loss to a minimum.
Advantage :
1. Cutting line width, up to 0.04-0.08mm. Use the appropriate auxiliary gas, making the slits neat and smooth, do not need secondary polishing.
2. Focusing the cutting head automatically.using of imported high-progress capacitive sensor, full-time dynamic tracking plate height.Adjusting the cutting height automatically that prevent the collision, you can cut the uneven plate.
3. Cutting machine adopts imported servo motor drive, import high-precision linear module, fast, high precision up to 0.01mm. Long service life.
4. The use of advanced fiber laser source, the core devices are imported. High stability, long life, no supplies, maintenance-free.
5. Professional design of gold powder recovery device, dust and dust collected all the recovery device. So that the loss to a minimum.
6. For gold and silver jewelry industry professional custom laser cutting system, with path optimization, cutting starting point optimization, multi-layer, layout function, save time and material.
7. Small size, low energy consumption, less supplies, easy maintenance. With compressed air can also be cut, low cost.
Application:
Laser cutting machine can cut: stainless steel plate, iron plate, silicon chip, ceramic plate, titanium alloy, epoxy, A3 steel,diamond, etc; ferrous metal and non-ferrous metal(e.g. Carbon steel,stainless steel,ceramic). It’s fast than the wire cutting machine.Mainly used in Jewelry and hardware or medical industry.
Sample Pictures
Smoke Purification System
DX5000II
Unpacking Inspection
1.Brushless motor, characterized by low noise and high revolution, stable operation, long service life, low power consumption, high efficiency (maintenance free and zero consumables).
2.Vortex fan design, characterized by fatigue resistance, smooth running, low noise, large air volume, high suction and high efficiency.
3.Stepless speed regulator installed for remote control of air volume.
4.Multiple filter design to ensure thorough filtration of toxic or hazardous substances and protect human and environmental health.
5.All filter are replaceable, which both extends the service life of filtering
cores and reduces their operation cost.
6. A dust collection filter elements to facilitate the recovery of metal powder.
7.Easy installation and environment fit
8.CE certified, safe and reliable.
9.National air quality testing certification.
10.All metal frame construction, resisting strong impact and vibration.
11.Casters on bottom for easy movem
Structure and dimensions
1. You will get a quick reply within 24 hours.
2. Two years warranty except the consumable items.
3. Free test samples before buy a machine
4. Free training in Superwave laser's factory, or through trainning video, user's manual, email, telephone, etc.
5. Our enginner can do a door-to-door instruction training service. (Air Ticket + Local accommodation bears by buyer)
6. You will get technical support through email, telephone, skype, etc when you need.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier