Vacuum homogenizer emulsifying emulsion machine for food beverage cosmetic commodity
>>>GET THE LATEST PRICE & CATALOGUE !
Performances and features
The vacuum emulsifiers produced by our company include many varieties. The homogenizing systems include upper homogenization, lower homogenization, internal and external circulating homogenization. The mixing systems include single-way mixing, double-way mixing and helical ribbon mixing. The lifting systems include single-cylinder lifting and double-cylinder lifting. Various high quality products can be customized according to customer requirements.
The triple mixing adopts the imported frequency converter for speed adjustment, which can meet different technological demands.
The homogenizing structure made through German technology adopts the imported double-end mechanical seal effect. The maximum emulsifying rotation speed can reach 4200rpm and the highest shearing fineness can reach 0.2-5μm.
The vacuum defoaming can make the materials meet the requirement of being aseptic. The vacuum material sucking is adopted, and especially for the powder materials, vacuum sucking can avoid dust.
The emulsifying pot lid can adopt lifting system, easy to clean and the cleaning effect is more obvious, the emulsifying pot can adopt tilt discharge.
The pot body is welded by imported three-layer stainless steel plate. The tank body and the pipes adopt mirror polishing, which fully conforms to GMP requirements.
According to technological requirements, the tank body can heat or cool the materials. The heating modes mainly include steam heating or electric heating.
To ensure the control of the whole machine is more stable, the electric appliances adopt imported configurations, so as to fully meet the international standards.
SME-D Technical parameter | |||||||||||
Model | Capacity | Homogenizer Motor | Stir Motor | Dimension | Total Power(KW) |
limit vacuum(Mpa) |
|||||
KW | r/min | KW | r/min | Length(mm) | Width(mm) |
Height (mm) |
Steam heating |
Electric heating |
|||
SME-D5 | 5L | 0.37 | 0-3000 | 0.18 | 0-63 | 1260 | 540 |
1600/1850 |
2 | 5 | -0.09 |
SME-D10 | 10L | 0.75 | 0-3000 | 0.37 | 0-63 | 1300 | 580 |
1600/1950 |
3 | 6 | -0.09 |
SME-D50 | 50L | 3-5.5 | 0-3000 | 1.1 | 0-63 | 2600 | 2250 |
1950/2700 |
9 | 18 | -0.09 |
SME-D100 | 100L | 4-7.5 | 0-3000 | 1.5 | 0-63 | 2750 | 2380 | 2100/2950 | 13 | 32 | -0.09 |
SME-D200 | 200L | 5.5-11 | 0-3000 | 2.2 | 0-63 | 2750 | 2750 | 2350/3350 | 15 | 45 | -0.09 |
SME-D300 | 300L | 7.5-11 | 0-3000 | 2.2 | 0-63 | 2900 | 2850 | 2450/3500 | 18 | 49 | -0.085 |
SME-D500 | 500L | 11 | 0-3000 | 4 | 0-63 | 3650 | 3300 | 2850/4000 | 24 | 63 | -0.08 |
SME-D1000 | 1000L | 15 | 0-3000 | 5.5 | 0-63 | 4200 | 3650 | 3300/4800 | 30 | 90 | -0.08 |
SME-D2000 | 2000L | 15 | 0-3000 | 7.5 | 0-63 | 4850 | 4300 | 3800/5400 | 40 | - | -0.08 |
Note: In case of inconformity of the data in the table due to technical improvement or customization, the real object shall prevail. |