A raised pavement marker is a safety device used on roads. These devices are usually made with plastic, or occasionally metal, and come in a variety of shapes and colors. Raised reflective markers, such as plastic, metal ones, include a lens or sheeting that enhances their visibility by retroreflecting automotive headlights, Some other names for specific types of raised pavement markers include delineators, cat's eyes, road studs, or road turtles. Sometimes they are simply referred to as "reflectors".
· Exceed the certification of ASTM D4280 and BS EN1463.
· water,oil,chemical and heat resistant
· Can work more than 3 years normally
· Very high reflectivity
· Easy installation with glues
· Photometric values:exceeds 600(mcd/lux)
Body material: | ABS |
Filling: | Epoxy+Quartz |
Lens Material: | PMMA |
Reflector type: | Double side/Single side |
Size: | 100*100*18mm |
Packing: | 56*22.5*22.2cm,100pcs/ctn |
· Check if the Flashing Road Studs charges and discharges normally
· Identify the place for installation
· Clean road surfaces
· Clean the bottom and use epoxy glue to stick it to the ground
· Wait 8 hours for drying before activating Road Studs
· Caution: never installed in the central lane