Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine.
Maximum production speed | not less than 15 meters per minute excluding cutting and punching |
Bending precision | the maximum profile deviations (dimensions and shape) shall not exceed the tolerances specified as following data (or equivalent tolerances) |
3T manual decoiler | 1set | |||||
Feeding→roll forming→rectify device→post cutting | ||||||
out-table | 2 set | |||||
Hydraulic station | 1set | |||||
Control desk | 1set |
Profile thickness | 0.4-0.8mm GI sheet | ||||
Size | 100×100mm |
3T manual decoiler | ||
Dimensions | 1700mm*1000mm*800mm | |
Width of feeding | 300mm | |
Capability | 3 Ton | |
Bound of expand &fight | 420mm—510mm | |
Mode of expand &fight | inner expand &fight by manual | |
Way of feeding | manual | |
Quantity | 1 |
Feeding | ||
Entrance table-guide | adjustable | |
Entrance width | about 80mm(according the final design) | |
Entrance and guide roller | diameter is ¢56mm, material is sae1045, surface with chrome | |
Quantity | 1 |
Forming Section | ||||||
Profile steel thickness | 0.4-0.7mm GI sheet | |||||
Main motor power | 4kw, AC motor, side motor to save space (Brand: Guomao which made in China) | |||||
Machine Voltage, Frequency, Phase | 380 V, 50 Hz, 3Phase | |||||
Roll station | about 8stations +1 station of rectify (according the final design) | |||||
Roller material | SAE1045, hardness and chrome plated surface | |||||
Shaft diameter | ¢56mm material: SAE1045 | |||||
Machine roll forming speed | 0-15m/min (not including punching and cutting time) | |||||
Machine structure | adopt wall panel which is much stronger | |||||
Transmission | by chain, 1.0inch |
Post cutting system | ||
Cutting power by hydraulic | 3KW | |
Working pressure | 12Mpa adjustable | |
Cutting after forming | Cut the sheet after roll forming to required length | |
Material of blade | Cr12, 58-62 HRC hardness | |
Length measuring | Automatic encoder length measuring | |
Brand | Omron | |
Tolerance of length | +/- 1.5mm for each piece end product |
out-table | ||
Size | about 2.0m long*0.3mwide*0.9mhigh | |
Supporter roller | ASTM 1045 with chrome | |
Diameter of rollers | 55mm | |
One out table with support roller | ||
Quantity | 2 units |
Hydraulic station | ||
Hydraulic power | 3kw | |
Working pressure | 12Mpa adjustable | |
Solenoid valve | 1 group | |
Hydraulic oil | 46# hydraulic oil | |
Quantity | 1 |
Control desk | ||
Operating system language | English and Chinese | |
Voltage, Frequency, Phase | 380 V, 50 Hz, 3Phase | |
Control panel | Button-type switch and touch screen | |
Unit of length | millimeter (switched on the control panel) | |
PLC brand | Panasonic | |
Frequency converter brand | Yaskawa | |
Touch screen | Taiwan Weinview |
Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine.
Lubricants | will be provided before the commissioning of the equipment, the specification, type of feeding, and the consumption will be declared in operation manual. | ||||
Liquid for hydraulic pressure stations | will be privide by testing in suppiler factory, the specification will be provided in operation manual. | ||||
Calibres, gauges and wrenches for equipment adjustment and setup (including for switching between profile heights) | will be included in the delivery |