9.6m 30ft lifestyle aluminum fishing boat with Enclosed Cabin
Australia design, Fully welded, deep V Bottom, CE certification
Measurement:
length of boat hull: 9m | beam: 2.55m | depth: 1.45m |
bottomsides: 5mm | topsides: 5mm | transom: 6mm |
number of people: 10 | min. power: 200hp | max. power: 500hp |
transom shaft length: 25" | weight(boat only): 2190kgs | overall length: 9.75m |
Standard Configurations:
transducer/trim tables mounting plate | safety windscreen/ scuttle | painting: two tone |
quality driver and passenger seating | large buoyancy tanks(5) | folding rear seats |
floor:aluminum plate with carpeted | hardtop roof with rod rack | bow rollor, bilge pump |
self draining deck with scuppers | cuddy cabin with portlights | battery box(2) |
fast draining anchor well | dive / swim rear ladder | double chiles |
storage pockets fore,aft and sides | extrude side decks | underfloor fuel tank 4000L |
aluminum rod holders | rocket launcher | kill tank 60L |
bait board with rod holders | rails (front, transom) | live bait tank 30L |
Sliding window and door | Kitchen Area |
Options:
Shower, Cushions,trailer,Yamaha outboard,Radar, navigation light, cabin light |
Anchor light, toilet, electric anchor, electric trim tabs, refrigerator, hydraulic steering |
Why Choose Us?
Quality
A: Gospel Boats are superior structures, built at our factory to European CE Certifications standards.
B: The material used is marine grade alloy certified, with a 5 mm plate hull throughout, and 4 mm plates on structural components.
C: Our boats have fully welded sealed alloy decks, and have fully welded frames and girders, ensuring that structural members are not left floating and unfixed as in all other brands.
D: All welders and fabricators at our factory are certified marine specialists.
E: To ensure the utmost quality, full on site chemical, physical and weight testing is undertaken of all raw materials.
F: All designs are prepared by naval architects on CAD software.
G: All plate aluminium cutting is computerised allowing for the perfect fit.
H: Every hull is personally inspected over and over and welds are tested for defects, fuel and water tanks are baffled and pressure tested.
I: Additionally, every boat is personally thoroughly inspected before it leaves the factory.
Welded Frames & Girders , Leakage Test
Australia Design
Bow | Midships | Stern |
|
| |
Super fine forefoot assures soft entrance into headsea. | Multichile allows for a very deep vee which guarantees a soft ride. | A 24 degree deadrise allows water force to escape and not to be generated through the hull. |
The DeepVee hull is a revolution in boat design – providing for the best quality boat and ride. | This ensures a boat that is very stationary at rest, therefore providing a premium boating platform for all your activities whilst onboard. | This ensures maximum speed for minimal horsepower and fuel. |
Safty
A: 5mm marine grade plate hull structure B: Full depth girders no more than 300mm apart, making them very strong in comparison to other methods of construction. C: The floor is self draining through sides and middle transom scuppers. D: There are separate chambers for fuel and storage. E: Stylishly rounded corners throughout the vessel to ensure safety to passengers. F: Warranty:Three years for the boat hull , one year for all the parts and painting |