2018 GSM Power Transformer Burglar Alarm System with shock sensor & tamper switch gsm alarm system
The principle of power transformer burglar alarm
Wireless monitoring alarm mainframe installed on telegraph pole or near transformer.Power line or transformer once stolen, three phase disconnection or power outage, alarm host immediately detects and send SMS and voice message to receiving host, and the host receives the alarm signal after the data is transmitted to the microcomputer, microcomputer analyze the alarm host and possible fault line, after the sound alarm, alarm screen display time, date, alarm extension, transformer fault and fault lines. The electronic map display the fault alarm and the actual location of transformer. The alarm data stored in the database for inquiry. The leadership on duty immediately deal with relevant problems after the alarm call and send the police to do scene inspection.
Main feature:
1.Can connect external industrial camera, this system with own SMS,MMS,Email functions
2.8 wired zones, open/closed alarm mode is optional by self-programming
3.Fixed code: 40 wireless zones,315/433MHz(optional)
4.Digital inputs are adopted optical-coupled isolators, which can prevent external high voltage from destroying internal components.
5.Send SMS automatically to report the state of digital input when it returns normal status.
6.Wireless keyboard for setting phone No.
7.Arm/disarm remotely through GSM SMS.
8.Send SMS and auto-dial to 5 preset mobile phone numbers while alarming and monitor the sound at site.
9.Record function: Maximum recording time:1 min
10.Voice function: support play the user record voice
11.With wired Mic interface and siren interface
12.Inquiry host’s status /alarm events/zones’name and arm/disarm status through SMS
13.Digital inputs are adopted cal-coupled isolators,which can prevent external high voltage from destroying internal.
14.GSM network wireless communication for alarm,no PSTN cable,not fear cable cut
15.Connect with alarm center through GSM network
Technical parameters:
1. GSM frequency band: 850/900/1800/1900MHZ(quad band)
2. Response time≤8s(GSM network normal)
3. Working conditions:
Operating temperature:-45~+60℃ Humidity ≤95% no condensation
4. Standby current :5mA
5. Alarm current: <500mA
6. Standby power consumption:< 0.3W
7. Alarm consumption:< 1-2W
8. Adapter voltage:AC100- 240V 50Hz/60Hz.
Output voltage: DC12V / 2A
Installation site: