2017 buy high voltage shunt capacitor bank
|
1. More than 23 years' production experience in capacitors-- our company was establised in 1993.
2. A wide range of products, including motor running capacitor, fan capacitor, low voltage shunt capacitor, float switch , contactor for switching capacitor , reactive power compensation installation etc.
3. A good image: first class automaatic rolling machines, advanced production environment, and advanced production technology etc.
4. Certification: passed the ISO9001 quality management system certificate, ISO14000 environment management system, CBB series capacitors have attained CQC, CE, Roh and UL certificates; low voltage reactive power compensation device have got CCC certificate. |
Before buy high volatge capacitor , pls note :
BAM(BFM) ALL Film High Voltage Capacitor Bank
Structure description
1. High Voltage Capacitor is made of shell and core, shell body constructed of thick steel sheet being soldiered. Outgoing porcelain bushing welded and passed through
top cover of capacitor bank , two sides of shell provided with two lifting brackets, one of lifting bracket assembled with earthing bolt.
2. High Volatge Capacitor core has several elements and insulated parts to be stacked. It uses Polypropylene film as medium and Al foil as polar plate to be rolled.
3. In order to work in different voltage rating, the elements in core will be connected in series or parallel. As required, the discharging resistance can be built-in.
Inside Details Show of High Voltage Capacitor
1. Select quality film , No-PCB .
2. Inner part is well packed to ensure the good performance of capacitor .
3. The case of high voltage power capacitor can be made as your request. We have : common steel type, 201 stainless steel, 304 stainless steel etc.
4. Every capacitor is well painted to ensure the good appearance.
Main Technical Parameter of high voltage capacitor
1. The relative error between capacitance and rating shall not exceed -5%~+5% or capacitor unit.
2. For the three-phase high volage capacitor, the ratio of maxi and minimum capacitances between any two phase terminals shall not exceed 1.08.
3. For the full film capacitor bank , Tangent of capacitor loss angle shall not exceed 0.0005, for the film and paper mixed capacitor, it shall not exceed 0.0012
4. Each capacitor shall withstand alternating U = 2.15U or DC voltage Ut = 4.3U voltage between terminals, test duration 10s, it shall have no break t N ndown and flashover.
5. AC voltage test between terminal and shell: all capacitor banks whose all terminals insulated from outer shell shall comply with the requirement of clause
18.1 in the standard of GB/711024.1-2010: during test, no breakdown and flashover shall happen.
6. Power frequency steady over-voltage and its running time of capacitor and the elements shall comply with sheet 2. In order to extend the working life,
the capacitor shall run under voltage not over ratings.
7. The capacitor is allowed to work under not over 1.3I steady over-current for long time which caused by rising voltage and high harmonics, for the capacitor with maxi positive deviation, the permissible current up to 1.37I . In order to extend the service life, the capacitor shall work under rated n
current.
8. The high volatage capacitor can withstand the surge up to 100 times of rated current, the times of such surging impact shall not exceed 1000, among these, some of surging impact shall happen at the capacitor inside temperature not more than 0°C.
9. The high voltage capacitor with built-in resistance, can discharge automatically and the voltage between terminals shall fall down to 75V or lower within 10 minutes.
10. High voltage shunt capacitor (more than 1000V) complies with national standard GB/T11024.1-2010 (eqv. IEC871-1)
Main Specifications of High Voltage Capacitor
|
Model |
Un(KV) |
Qn(Kvar) |
Fn(Hz) |
Cn(μF) |
In(A) |
|
BWF6.3-25-1W |
6.3 |
25 |
50 |
2.005 |
3.968 |
|
BWF6.3-30-1W |
6.3 |
30 |
50 |
2.406 |
4.762 |
|
BWF6.3-50-1W |
6.3 |
50 |
50 |
4.01 |
7.937 |
|
BWF6.6/ -25-1W |
6.6/ |
25 |
50 |
5.481 |
6.561 |
|
BWF6.6/ -30-1W |
6.6/ |
30 |
50 |
6.577 |
7.873 |
|
BWF6.6/ -50-1W |
6.6/ |
50 |
50 |
10.96 |
13.12 |
|
BWF10.5-25-1W |
10.5 |
25 |
50 |
0.7218 |
2.381 |
|
BWF10.5-30-1W |
10.5 |
30 |
50 |
0.8861 |
2.857 |
|
BWF10.5-50-1W |
10.5 |
50 |
50 |
1.444 |
4.762 |
|
BWF11/ -25-1W |
11/ |
25 |
50 |
1.973 |
3.936 |
|
BWF11/ -30-1W |
11/ |
30 |
50 |
2.368 |
4.724 |
|
BWF11/ -50-1W |
11/ |
50 |
50 |
3.946 |
7.873 |
|
BAM6.6/ -100-1W |
6.6/ |
100 |
50 |
21.92 |
26.24 |
|
BAM6.6/ -150-1W |
6.6/ |
150 |
50 |
32.88 |
39.36 |
|
BAM6.6/ -250-1W |
6.6/ |
250 |
50 |
43.84 |
52.49 |
|
BAM11/ -100-1W |
11/ |
100 |
50 |
7.892 |
15.75 |
|
BAM11/ -150-1W |
11/ |
150 |
50 |
11.84 |
23.62 |
|
BAM11/ -250-1W |
11/ |
250 |
50 |
15.87 |
31.49 |
|
BAM11-100-1W |
11 |
100 |
50 |
2.631 |
9.091 |
|
BAM11-150-1W |
11 |
150 |
50 |
3.964 |
13.64 |
|
BAM11-250-1W |
11 |
250 |
50 |
5.261 |
18.18 |
|
BAM12-100-1W |
12 |
100 |
50 |
2.21 |
8.333 |
|
BAM12-150-1W |
12 |
150 |
50 |
3.216 |
12.5 |
|
BAM12-250-1W |
12 |
250 |
50 |
4.421 |
16.67 |
Installation of High Voltage Capacitor
1. All these series capacitor banks serve for common ambient conditions, standard category for capacitor covers -40/A,-25/A,-5/A,-5/C, working altitude not more than 1000m
2. The capacitor bank shall be mounted in the place where there shall comply with the requirement of clause 5.1, the capacitor for indoor use shall be mounted on the place where there has no corrosive steam and gas, and snow, rain, dust can't be accessible, and well ventilated.
3. The capacitor bank can be mounted on steel support, layout not more than 3 layers, each layer not more than two rows. In order to get good ventilating, the
clearance between capacitors in each layer shall not less than 200mm, outdoor capacitor shall have 300mm at least, and the top of the capacitor shall have 1000mm away from house roof at least.
4. The horizontal separated plate shall not be mounted, or it may block air flow. Outlet for cooling air shall be mounted on the top of each group of capacitors.
5. Before capacitors mounted on support, it shall allocate the capacitance, make phase capacitance to be balanced (balance rate 5%)
6. Wire connection for capacitors shall use soft conductor. The side of capacitor with nameplate shall face outside, convenient for inspection.
7. When rated voltage of capacitor is equal to the system, the capacitor can be directly mounted on steel support, and the shell of capacitor is earthed and well connected. If the rated voltage of single phase capacitor less than system voltage, please utilize star connection for these capacitors, at this case the shells of series connected capacitors shall absolutely isolated from earth, its insulation level not less than rated voltage of the system.
Every product is well packed to ensure the safety !
Q 1. how's the delivery time of high volatge capacitor bank ?
A. Depend on your quantity ,usually within 15days after receive your payment in advance.
Q 2.Would you accept to use our logo ?
A.If you have good quantity,it absolutly is no problem to do OEM.
Q3. Would you offer free sample?
A. We will not offer free sample for this product.
Q4 what's your guaranty time?
A. one year,if you meet quality problem duing this time, we will take charge of it.
Q5 What's your payment term?
A. TT LC West Union
Q6 What's the warranty time and how about your service ?
A. One year warranty. We will provide you with our specific technical datas and drawings, and we will track the delivery for you. Any feedback and suggestion for our products are welcomed.
Our company has already passed the ISO9001 Quality Management System Certification, ISO 14000 Environment Management System etc.
High voltage power capacitor has passed CE certification
1. Professional Sales & Engineers Teams
We have professional engineers& sales team, aiming at providing a full set service. All members of our sales team are enthusiastic, energetic , with good sense of responsibility. And our engineers have great enterprise and creativity. We will use the best attitude to provide you with our best service .
2. Timely Follow-up On Production Process & Delivery
After you place your order , we will report the production process timely. And after your goods is ready, we will inform you and report the news about the delivery timely.
3. Your Feedbacks and Suggestions Are Valued
Any feedbacks and suggestions are welcomed . Your problem , we will pay great attention and try our best to solve it.
SO...........................What are you waiting for ?
|
1. With more than 21 years' experience in manufacture, the quality of our products is always reliable.
2. Our products have been exported to many countries , enjoy a good reputation and wide popularity.
3. Every business is very vital to us, and we focus on providing our customers with best service.
4. Professional and energetic technical and sales team, aiming at providing a full suit of serices.
5. Advanced equipments, and a good , safe production environment. |
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier