2000HZ hot sale electromagnetic tester shaking three-axis vibration test table
Product Usge
Electromagnetic vibration tables are widely used in defense, aviation, communications, electronics, automotive, home appliances, and other industries. This type of equipment is used to find early faults, simulate actual working condition assessment and structural strength test. The product has a wide range of applications, wide application range, and remarkable and reliable test results. Sine wave, frequency modulation, frequency sweep, programmable, multiplier, logarithm, time control.
Features
1. Using the most advanced and simple operation technology, fixed frequency, frequency sweeping, program is convenient to switch at any time
2. With time timing, countdown display function
3. Touch controller, easy to operate, solves the shortcomings of digital display operation
4. The control parameters are displayed in real time, without manual intervention.
5. The base of the machine adopts the vibration-proof device, which is easy to install and runs smoothly. It is not necessary to install the anchor screws.
6. Embedded amplitude prediction program and easy to adjust amplitude
7. Four-point synchronous excitation, uniform vibration of the table
8. Stepless adjustment of amplitude, fixed frequency and frequency sweep operation function to adapt to various test requirements of different industries
9. Increase the anti-interference circuit to solve the interference of the control circuit due to the strong electromagnetic field
10. Curve display function, you can view the frequency waveform change at any time.
11. Curve supports direct export function
12. Automatically switch the direction of wor
Technical Parameters
| Vibration direction: | Vertical + horizontal + front and rear (automatic switching) |
| Table size (mm): | 500×500 |
| Amplitude (P-P): | 0-5mm (random, change with frequency, easy amplitude adjustment) |
| Sweep frequency: | 1-600HZ can be set arbitrarily (true standard back and forth frequency sweep) |
| Maximum acceleration: | 20g (random, change with frequency, easy to adjust the acceleration) |
| Indicator function: | FM, sweep, time, program |
| Precision: | Frequency can be displayed to 0.1Hz, precision 0.1Hz |
| Programmable function: | 5-600HZ, 1-8 segments can be arbitrarily set frequency and time |
| Multiplier work (0.1Hz): | 8 segments multiplied by 1 low to high frequency 2 high to low frequency 3 low to high then to low frequency / recyclable |
| Logarithmic power (0.1Hz): | 1 down to upper frequency 2 up to down frequency 3 down to up to down frequency -3 mode logarithm / recyclable |
| Vibration waveform: | Sine wave |
| time control: | Time can be set |
| power: | 1.2KW |
1.What's your MOQ?
At present we haven't strict policy for this, so welcome orders with any quantity.
2. Are you a factory or trade company?
We are a manufacturer located in Dongguan. You will be welcomed to visit our factory or we also can share our factory vedio for you at any time.
3. We are not professional for operation and installation of your machine?
While it is not a stumbling block, our machine is easy to operate, no need to professional training, and the instruction manual and video sent to you are enough. What's more, we have professional engineers and they can solve all questions.
4. How about packaging? If machine damaged, what should I do ?
Usually machine is packed with wooden case and standard export carton, plywood carton or as your requirement. Damage haven't happened before, if happen, we will arrange replacement.
5. We haven't do business before, how can I trust your company and machine?
We are a factory with more than 13 years and without amy complaints on Alibaba. and our machine have exported to many countries and have a good feedback.
6. If I want to visit your factory, is the traffic convenient ?
Our company traffic is very convenient, it is only 10 minutes by car or taxi from our city light rail to our company, we also can arrange the shuttle bus for you to our factory.
7. Does your product have CE certification ?
Yes, we not only have the CE certification,but also have the FCC,ISO,etc.
8. If there is not any size meet my need, can I customiz ?
Of cause, we are the 13 years factory that with the rich experience in custom made service,not only can provide the customiz serivice,but also can provide the professional advice.
9.How is the after-sales service?
Our support is guaranteed for 12 months.
For all my customers, we will help you repair. Send us questions through text, images or videos, and we will tell you about them and help you fix them.
If the machine parts are damaged during the warranty period, we can send you a new machine parts free of charge. We have English specifications, online service personnel, video teaching of machine operation, and our machine operation is very simple.
10. What about the services and product' quality?
Service: ,Design service,Buyer lable service.
Quality: Each instruments must be carried out 100% quality examination and test, the finished products must through a third party calibration institutions before shipping and delivery goods.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier