SOCMA 20 ton Forklift Crane HNFC200-100 |
||||
POS |
ITEM DESCRIPTION |
UNIT |
HNFC200-100 |
|
Characteristics |
1.1 |
Capacity |
Q(t) |
20 |
1.2 |
Load center |
c(mm) |
1000 |
|
1.3 |
|
|
|
|
1.4 |
Wheel base |
y(mm) |
4000 |
|
Weight |
2.1 |
Truck Weight |
kg |
35000 |
2.2 |
|
|
|
|
2.3 |
|
|
|
|
Dimension
|
4.1 |
Mast/carriage tilt angle(front/rear) |
° |
6°/12° |
4.2 |
Mast height(fork lowering) |
mm |
3510 |
|
4.3 |
Max. lifting height |
h3(mm) |
3500 |
|
4.4 |
Overall height(fork raised) |
h4(mm) |
5610 |
|
4.5 |
Overall length (with 2000mm forks) |
l1(mm) |
8340 |
|
4.6 |
Fork front vertical surface to the rear end of the vehicle |
l2(mm) |
6345 |
|
4.7 |
Overall Width |
b1/b2(mm) |
3050 |
|
|
Cylinder oil seal brand |
|
Japan NOK or GermanyB+S |
|
|
Fork brand |
|
Cascade |
|
4.8 |
Fork dimension |
s/e/l(mm) |
100x260x2000 |
|
4.9
|
Fork carriage width |
b3(mm)
|
2200
|
|
4.10 |
Mast Min ground clearance (with load) |
m1(mm) |
300 |
|
4.11 |
Outrigger min ground clearance(with load) |
m2(mm) |
320 |
|
4.12
|
Min.Turning radius |
Wa(mm)
|
7800
|
|
Crane arm |
|
Model |
|
SQ1000ZB6 |
|
Max. crane lifting torque |
kN.m |
1000kN.m When crane lifting 30 ton on the position of 3 meter, the position of fork need to add counter balance 3m position hoist 30t (loads need to be loaded at the fork) |
|
|
Max. working radius |
mm |
13760 |
|
|
Max.crane lifting height |
m |
17 |
|
|
Other configuration |
|
Remote control |
|
Engine |
7.1 |
Engine brand/model |
Dong feng Cummins QSC8.3-C240 |
|
7.2 |
Power ISO 1585 |
KW |
179 |
|
7.3 |
rpm |
min-1 |
2200 |
|
7.4 |
air cylinder |
cm3 |
6 |