2 Ports SATA III SATA 3.0 TO PCI-E X1 PCIE 1X Controller Expansion Card 6Gbps in stock
| 2 Ports SATA III SATA 3.0 TO PCI-E X1 PCIE 1X Controller Expansion Card 6Gbps in stock |
Feature:
1. Compliant with Serial ATA Specification 3.0, down compatible with SATA2.0 SATA1.0.
2. Conformance to PCI-Express v2.0 specifications, down compatible with PCI-Express v1.0.
3. Supports communication speeds of 6.0Gbps,3.0Gbps and 1.5Gbps.
4. Supports Gen 1i,Gen 2i,Gen 2m, Gen 2x and Gen 3i.
5. Supports two SATA Ports.
7. Supports AHCI 1.0 and IDE modes.
8. Supports Native Command Queuing(NCQ)
9. Supports Port Multiplier FIS based switching or command based switching.
10. Supports Hot Plug and Hot Swap.
11. Compatible with SATA 6G,3G and 1.5G Hard Drives
Specification:
Product interface: PCI-E 1X 4X 8X 16X
Chipest: Marvel 9125
Support specification: SATA3.0 7PIN
Bus interface: PCI-Express X1 slot
Extension interface: 2 SATA3.0 interfaces
System requirements: there is an available PCI Express X1 slot, while supporting PCI-E X2 X4 X8 X16
Operating system: Windows10/8/7 (32/64 bit) / Vista (32/64 bit) / XP/2003/2008/linux
Package content:
1 x PCI-E to SATA 3.0 Extension Card
1 x Small and Big Bracket
1 x Screw
Note:
1. Please use SATA3.0 data line to achieve the best results
2. PCI-E slot must have a V2.0 or higher slot, V1.0 will not exceed 250M, PCI-E is X1 or X16 as long as it is V2.0 version, there is spare X16 slot directly inserted On the X16 slot,
3. BOIS setting of the motherboard: SATA mode should be changed to AHCI, although some motherboard PCIE is version 2.0, but BOIS does not enable high-speed transmission mode by default (gen2 high speed mode) needs to be manually turned on under PCI-E 1.0 only 200- 250M, 2.0 below 350-400M
If you do not accept, please change the motherboard.
Product driver files:
1. CD-ROM: ... DRIVER \ SATA CARD \ Marvell \ 9125, and then select the appropriate folder according to the system
The PCIE to SATA3.0 adapter card is used as follows:
I. Connection conditions and solutions of system disk and PCIE to SATA3.0 adapter card:
1. The SATA interface mode of PCIE to SATA3.0 is AHCI mode. If you want to insert a system disk on our card, the premise is that your system disk must be installed in AHCI mode when the system is installed on the motherboard, otherwise it cannot pass. Our card transfer card activates the system.
2. If it is determined that the SATA interface installation system of the system disk inserted in the motherboard is AHCI mode, you can directly insert the hard disk into our card, and then enter the motherboard BIOS to set the system disk to the first boot.
3. Both of the above conditions are met. If it still fails to start or restart repeatedly, it may be that the hard disk interface of the motherboard conflicts with our adapter card. The solution is to enter the motherboard BIOS and set the motherboard hard disk interface option to Disabled, save and restart to start the system
Second, the connection conditions and solutions of ordinary disk and PCIE to SATA3.0:
1. When the system disk is inserted on the motherboard and the ordinary disk is inserted on the PCIE to SATA 3.0 card, then only the adapter card information and the ordinary disk model need to be detected at startup.
2. If condition 1 is satisfied and the system cannot be started, then enter the motherboard BIOS and set the system disk to the first boot.
Third, the system disk and ordinary disk and PCIE to SATA3.0 connection and solution:
1. Premise, if the system disk with the original motherboard installed system is AHCI mode test, you can use the following methods to achieve it. If the system is installed in IDE mode, then you can only reinstall the system by PCIE to SATA3.0. .
After the conditions of 2 and 1 are satisfied, you cannot enter the BIOS of the motherboard, and set the first system disk as the first boot.
3, 1.2 conditions are met, or can not start, then it may be a conflict of integrated SATA interface, please enter the motherboard BIOS and set SATA to Disabled.
Own CE, FCC, RoSH certification etc, OEM&ODM service are offered.
The company products include 5G 4G Modem Adapter Card, PCI-E 3.0 16X 8X 4X 1X Riser Card Extension Cable, Computer Power Supply, USB SATA PCI-E Expansion Riser Card, SSD Adapter Card, Mini SAS Cable, Other Computer Cables, and Other Computer Accessories etc. Its self-owned brand BJD is now popularly welcome and recognized by customers.
Establish in September 2016, Shenzhen Bojiada Technology Co., Ltd has 2500 square meters manufacturing workshops, nearly 100 employees and more than 4 standard production lines at a monthly capacity of 800000 unites. An new Industry part is under construction, the local employees number will increase to 200.
Company philosophy: “ Keep pace with the times, Development innovation, Pursue excellence, Stick to integrity “
Shenzhen Bojiada Technology Co., Ltd is a comprehensive enterprise that dedicated in Computer and Network Accessories & Peripheral, it combines R&D, production, marketing and service together.
Own CE, FCC, RoSH certification etc, OEM&ODM service are offered.
The company products include 5G 4G Modem Adapter Card, PCI-E 3.0 16X 8X 4X 1X Riser Card Extension Cable, Computer Power Supply, USB SATA PCI-E Expansion Riser Card, SSD Adapter Card, Mini SAS Cable, Other Computer Cables, and Other Computer Accessories etc. Its self-owned brand BJD is now popularly welcome and recognized by customers.
Establish in September 2016, Shenzhen Bojiada Technology Co., Ltd has 2500 square meters manufacturing workshops, nearly 100 employees and more than 4 standard production lines at a monthly capacity of 800000 unites. An new Industry part is under construction, the local employees number will increase to 200.
Company philosophy: " Keep pace with the times, Development innovation, Pursue excellence, Stick to integrity"
A. Sample order are available
B. OEM / ODM are welcome
C. Shipping and Express will be tracked and reported at any time after sending
D. We will resolve after-sale problem in 24 hours
Are you factory?
Yes. We are a professional manufacturer of computer accessories for 10 years.There are more 200 production workers, 10 R&D engineers and 30 quality inspection technicians in our factory.
What is its lead time for samples and mass production?
Within 3 work days for samples and 10 days for mass production.
How to proceed an order for our products?
Firstly let us know your demands or requirements.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the order and pay for the formal order.
Fourthly We arrange the production.
Can you produce goods as customer design?
Welcome to send your design or sample to us , ODM&OEM service are offered friendly.
What is your payment terms?
We accept most of the payment methods, but mainly accept Bank Transfer(T/T), Alibaba Payment via Credit Card and Western Union.
What about the quality?
All items will be strict inspection before leave the factory. Kindly please check items once you received parcel. We will help you solve it if find out any quality problem.
If more information you want to know, please feel free to contact us! Thank you!!!
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier