2/4 flutes carbide corner rounding bull nose end mill with wear-resisting coating
Raw Material: Use YG10X with 10% Co content and 0.8um grain size.
Coating: AlTiN, High aluminum content provides excellent hot hardness and oxidation resistance.
Tolerance of End Mill Diameter:1 < D≤6 -0.010 ~ -0.030;6 < D≤10 -0.015 ~ -0.040;10 < D≤20 -0.020 ~ -0.050
Workpiece Material | ||||||
Carbon Steel | Alloy Steel | Cast Iron | Aluminum Alloy | Copper Alloy | Stainless steel | Hardened Steel |
√ | √ | √ |
Item | Diameter | R | Flute Length | Shank Diameter | Total Length | Flutes |
D | L1 | d | L | |||
UKO3*0.5*8*3*50*4 | 3 | 0.5 | 8 | 3 | 50 | 4 |
UKO3*1*8*3*50*4 | 3 | 1 | 8 | 3 | 50 | 4 |
UKO3*0.5*8*4*50*4 | 3 | 0.5 | 8 | 4 | 50 | 4 |
UKO3*1*8*4*50*4 | 3 | 1 | 8 | 4 | 50 | 4 |
UKO4*0.5*10*4*50*4 | 4 | 0.5 | 10 | 4 | 50 | 4 |
UKO4*1*10*4*50*4 | 4 | 1 | 10 | 4 | 50 | 4 |
UKO5*0.5*13*5*50*4 | 5 | 0.5 | 13 | 5 | 50 | 4 |
UKO5*1*13*5*50*4 | 5 | 1 | 13 | 5 | 50 | 4 |
UKO6*0.5*15*6*50*4 | 6 | 0.5 | 15 | 6 | 50 | 4 |
UKO6*1*15*6*50*4 | 6 | 1 | 15 | 6 | 50 | 4 |
UKO8*0.5*20*8*60*4 | 8 | 0.5 | 20 | 8 | 60 | 4 |
UKO8*1*20*8*60*4 | 8 | 1 | 20 | 8 | 60 | 4 |
UKO8*2*20*8*60*4 | 8 | 2 | 20 | 8 | 60 | 4 |
UKO8*3*20*8*60*4 | 8 | 3 | 20 | 8 | 60 | 4 |
UKO10*0.5*25*10*75*4 | 10 | 0.5 | 25 | 10 | 75 | 4 |
UKO10*1*25*10*75*4 | 10 | 1 | 25 | 10 | 75 | 4 |
UKO10*2*25*10*75*4 | 10 | 2 | 25 | 10 | 75 | 4 |
UKO10*3*25*10*75*4 | 10 | 3 | 25 | 10 | 75 | 4 |
UKO12*0.5*30*12*75*4 | 12 | 0.5 | 30 | 12 | 75 | 4 |
UKO12*1*30*12*75*4 | 12 | 1 | 30 | 12 | 75 | 4 |
UKO12*2*30*12*75*4 | 12 | 2 | 30 | 12 | 75 | 4 |
UKO12*3*30*12*75*4 | 12 | 3 | 30 | 12 | 75 | 4 |
UKO14*0.5*35*14*100*4 | 14 | 0.5 | 35 | 14 | 100 | 4 |
UKO14*1*45*14*100*4 | 14 | 1 | 45 | 14 | 100 | 4 |
UKO16*0.5*45*16*100*4 | 16 | 0.5 | 45 | 16 | 100 | 4 |
UKO16*1*45*16*100*4 | 16 | 1 | 45 | 16 | 100 | 4 |
UKO18*0.5*45*18*100*4 | 18 | 0.5 | 45 | 18 | 100 | 4 |
UKO18*1*45*18*100*4 | 18 | 1 | 45 | 18 | 100 | 4 |
UKO20*0.5*45*20*100*4 | 20 | 0.5 | 45 | 20 | 100 | 4 |
UKO20*1*45*20*100*4 | 20 | 1 | 45 | 20 | 100 | 4 |
UKO3*0.5*12*3*75*4 | 3 | 0.5 | 12 | 3 | 75 | 4 |
UKO3*1*12*3*75*4 | 3 | 1 | 12 | 3 | 75 | 4 |
UKO3*0.5*12*3*100*4 | 3 | 0.5 | 12 | 3 | 100 | 4 |
UKO3*1*12*3*100*4 | 3 | 1 | 12 | 3 | 100 | 4 |
UKO4*0.5*16*4*75*4 | 4 | 0.5 | 16 | 4 | 75 | 4 |
UKO4*1*16*4*75*4 | 4 | 1 | 16 | 4 | 75 | 4 |
UKO4*0.5*20*4*100*4 | 4 | 0.5 | 20 | 4 | 100 | 4 |
UKO4*1*20*4*100*4 | 4 | 1 | 20 | 4 | 100 | 4 |
UKO5*0.5*20*5*75*4 | 5 | 0.5 | 20 | 5 | 75 | 4 |
UKO5*1*20*5*75*4 | 5 | 1 | 20 | 5 | 75 | 4 |
UKO5*0.5*25*5*100*4 | 5 | 0.5 | 25 | 5 | 100 | 4 |
UKO5*1*25*5*100*4 | 5 | 1 | 25 | 5 | 100 | 4 |
UKO6*0.5*20*6*75*4 | 6 | 0.5 | 20 | 6 | 75 | 4 |
UKO6*1*20*6*75*4 | 6 | 1 | 20 | 6 | 75 | 4 |
UKO6*0.5*30*6*100*4 | 6 | 0.5 | 30 | 6 | 100 | 4 |
UKO6*1*30*6*100*4 | 6 | 1 | 30 | 6 | 100 | 4 |
UKO6*0.5*40*6*150*4 | 6 | 0.5 | 40 | 6 | 150 | 4 |
UKO6*1*40*6*150*4 | 6 | 1 | 40 | 6 | 150 | 4 |
UKO8*0.5*25*8*75*4 | 8 | 0.5 | 25 | 8 | 75 | 4 |
UKO8*1*25*8*75*4 | 8 | 1 | 25 | 8 | 75 | 4 |
UKO8*0.5*35*8*100*4 | 8 | 0.5 | 35 | 8 | 100 | 4 |
UKO8*1*35*8*100*4 | 8 | 1 | 35 | 8 | 100 | 4 |
UKO8*0.5*50*8*150*4 | 8 | 0.5 | 50 | 8 | 150 | 4 |
UKO8*1*50*8*150*4 | 8 | 1 | 50 | 8 | 150 | 4 |
UKO10*0.5*40*10*100*4 | 10 | 0.5 | 40 | 10 | 100 | 4 |
UKO10*1*40*10*100*4 | 10 | 1 | 40 | 10 | 100 | 4 |
UKO10*0.5*50*10*150*4 | 10 | 0.5 | 50 | 10 | 150 | 4 |
UKO10*1*50*10*150*4 | 10 | 1 | 50 | 10 | 150 | 4 |
UKO12*0.5*45*12*100*4 | 12 | 0.5 | 45 | 12 | 100 | 4 |
UKO12*0.5*55*12*150*4 | 12 | 0.5 | 55 | 12 | 150 | 4 |
UKO provides end mills for machining carbon steel, iron steel, low and high alloyed steel and will launch a new type of coating for processing hardened steel. This is a special kind of steel end mill, which provides predictable and long tool life in a range of applications, including rough machining and finishing processing, including the use of hard steel, which usually needs to be removed with a large inventory.