Vertical single axis slew drives can be used for solar PV panels tracker Wanael Photovoltaic Power Station Mounting System,Single Axis Solar Sun Tracker
Single axis solar tracking system
Single axis solar tracking system is widely applied to solar farm projects. its’ construction is more simple than dual axis system, so it’s more cheap than dual axis system.
For big solar farm projects, they need cheaper cost for the whole project, but the power generation ability need be better than normal solar frame. The single axis solar tracking system is the best choice.
For single axis solar tracking, it just need one linear actuator(or slewing drive) and one controller components to implement. If you want to know more details about the construction, please go to visit this vedio as below or visit our company YouTube chanel.
flat single axis solar tracking system, it has one axis tracking the sun at east-west direction automatically every day, with simpler structure, smart assembling and excellent terrain adaptability, rotation parts adopt stainless steel, free maintenance, designed lifespan over 25 years. At medium and low latitude region, it increases investment about 5-8%, while promotes generating capacity by 15%-25% and brings more rewards for investors.
Since the 21st century, in order to cope with global ecological changes, mankind's demand for clean energy has increased day by day. Among them, photovoltaic solar energy is the clean energy that mankind relies on most.
In recent years, as the cost of photovoltaic power generation has been greatly reduced, the penetration rate of photovoltaic power has become higher and higher.
At the same time, people have been looking for ways to improve the conversion efficiency of solar energy. In addition to improving the power generation efficiency of the photovoltaic panels themselves, the use of solar tracking brackets is the most effective means of improvement. In recent years, the installation of tracking brackets has been growing at an annual rate of more than 40%, and market demand has also blown out, but the relevant control technology is still in the hands of a few large companies.
With the concept of a community with a shared future for mankind and the purpose of improving the global environment, Jimmy Technology strives to promote the popularization of solar-related technologies. Under this vision, Jimmy Technology has developed GPSST photovoltaic support tracking controller series, hoping to allow new photovoltaic technology to enter the mass market. The GPSST series are divided into two categories: single-axis tracking series and dual-axis tracking series. Its own chip has an automatic satellite search and positioning function, which can update coordinates and time in real time. Through the patented algorithm independently developed by the company, supplemented by a variety of sensors, the function of accurately tracking the angle of the sun's rays is achieved. Compared with light-sensitive trackers and other trackers, GPS trackers have higher automatic control methods, simpler installation and operation methods, more precise control effects, and are not affected by weather changes. This tracker is GPSST-S2 dual axis tracking controller, suitable for the construction and use of medium and large photovoltaic power plant projects. It can be used to design a more wind-resistant structure.
Product name:
|
JIMMY-20 flat single axis solar tracking system
|
Control mode:
|
Time + GPS Control
|
Tracking accuracy:
|
0.1·°-2° (Adjustable)
|
Motor:
|
24V gear motor
|
Power consumption:
|
3 kwh/set/year
|
Output torque:
|
13650NM
|
Azimuth angle tracking range:
|
±50°
|
Brackets material:
|
Hot-dipped galvanized steel, Zinc layer thickness≥65μm
|
Max. wind resistance:
|
24m/s in running state, 40m/s in wind protect state
|
System guarantee:
|
3 years
|
Working temperature:
|
-40℃ - +75℃
|
Certificates:
|
CE, TUV
|
Weight:
|
250 - 350kgs
|
Mount solar panels:
|
15 - 25 pcs solar panels
|
Total power:
|
4.0kW-10.0kW
|
Q1: Isit ok for you to make customer's brand?
A1: Yes, we can make customized brand.
Q2: do you have it in stock?
A2: some products are available in stock and can be delivered
within 7 days.
Q3: how long does it take for mass production?
A3: according to the quantity, about 30-60 days.
Q4: which payment method is acceptable?
A4: T / T, L / C. western union.
Q5: how to ensure the quality?
A5: We have a strong team, special design, exquisite production
technology and exquisite materials and exquisite workmanship.
Q6: what's your MOQ?
A6: the minimum order quantity is 500 PCs. Of course,
we can accept small trial orders for some products.