PE pipe inner wall is smooth with features of low friction resistance and energy saving and does not change with the use of time.Its pressure loss is about 30% smaller than steel pipe, therefore,smaller pe pipe is a better way than steel pipe.PE pipe has good hygienic performance with no additives, so it is impossible to pollute the drinking water.Polyethylene material level is 0
(the lowest level) in ISO standard and it is moldy material. Compared with other commonly used plastic materials,mildew resistance of polyethylene is much higher resulting a long term use without scaling.
Welcome to TradeChina
2" 1/2inch pe100 Material Poly pipe Roller Plastic Water Hdpe Roll Pe100 Irrigation Drip Pipe 32mm
FOB Reference Price
Purchase quantity ()
Minimum order quantity
Payment
Mio toy Trading Co., Ltd
China - Wuxi
Manufacturer
Trade Capacity
Export Percentage
Nearest Port
shanghai
Accepted Delivery Terms
Employees
501-1000 people
Accepted Payment Currency
USD
Average Lead Time
10 Day(s)
Certifications
Disney
Product Specifications
--Product Description
Products Description
2" 1/2inch pe100 Material Poly pipe Roller Plastic Water Hdpe Roll Pe100 Irrigation Drip Pipe 32mm
Specification:
Features:
1. Nontoxic
2. Corrosion resistance
3. No Leakage
4. Higher flow capacity than steel pipes
5. Convenient for construction and installation
6. Lower installation costs than cement and steel pipes
7. Longevity of working life more than 50 years
8. HDPE pipe can be recycled and environment-friendly
Advantages:
1. Urban potable water pipeline network system.
2. Replaceable cement pipe, iron pipe and steel pipes.
3. Fire fighting pipeline.
4. Landscaping water supply network.
5. Sewage discharge pipes.
6. Ore and mud transfers.
7. Agricultural irrigation pipe.
Product Paramenters
Physical properties index:
No. | Item | Requirements | ||||
1 | Percentage of breaking-elongation,% | ≥350 | ||||
2 | Longitudinal reversion(110℃),% | ≤3 | ||||
3 | Oxidation induction time (200℃)min | ≥20 | ||||
4 | Weather resistance 1. (After the pipe has accepted the aging energy which equal to or more than 3.5GJ/m2) | 80℃ static hydraulic strength (165h) | No break, no leakage. | |||
Percentage of breaking-elongation,% | ≥350 | |||||
Oxidation induction time (200℃)min | ≥10 | |||||
1. Only suitable for pipe in blue color. | ||||||
Application field: Drinking water supply pipe for urban and rural area, liquid transmission pipe in chemical, chemical fiber, food, forestry and metallurgy industry, waste water drainage pipe, mining slurry transmission pipe for mining field. | ||||||
Technical data sheet:
No | Items | HDPE Pipe |
1 | Molecular | ≥300 000 |
2 | Density | 0.960 g/cm3 |
3 | Tensile breaking strength | ≥28 Mpa |
4 | Longitudinal contraction rate of return | ≤3% |
5 | Breaking elongation | ≥500% |
6 | Resistant to corrosion | good |
7 | Tensile strength | ≥28Mpa |
8 | Static hydraulic strength | 1)20℃,cycle stress 12.4Mpa,100h,no break,no leakage |
2)80℃,cycle stress5.5Mpa,165h,no break,no leakage | ||
3)80℃,cycle stress5.0Mpa,1000h,no break,no leakage | ||
9 | MFR(190℃,5kg,)g/10min | ≤25% |
10 | Oxidation induction time (200℃)min | ≥20 |
Connection Methods
Socket Fusion Joint
This technique consists of simultaneously heating both the external surface of the pipe and the internal surface of the socket
fitting until the material reaches fusion temperature; inspecting the melt pattern; inserting the pipe end into the socket; and
holding it in place until the joint cools.Mechanical equipment is available and should be used for sizes larger than 2 inch
diameter to attain the increased force required and to assist in alignment. Follow these general steps when performing socket
fusion: 1.Select the equipment 2.Square and prepare the pipe ends 3.Heat the parts 4.Join the parts 5.Allow to cool.
fitting until the material reaches fusion temperature; inspecting the melt pattern; inserting the pipe end into the socket; and
holding it in place until the joint cools.Mechanical equipment is available and should be used for sizes larger than 2 inch
diameter to attain the increased force required and to assist in alignment. Follow these general steps when performing socket
fusion: 1.Select the equipment 2.Square and prepare the pipe ends 3.Heat the parts 4.Join the parts 5.Allow to cool.
Butt Fusion Joint
The most widely used method for joining individual lengths of large diameter polyethylene pipe is by heat fusion of the pipe butt
ends.This technique, which precludes the need for specially modified pipe ends or couplings, produces a permanent, economical and
flow-efficient connection. Field-site butt fusions may be made readily by trained operators using specially developed butt fusion
machines that secure and precisely align the pipe ends for the fusion process. The six steps involved in making a butt fusion
joint are: 1.Securely fasten the components to be joined 2.Face the pipe ends 3.Align the pipe profile 4.Melt the pipe interfaces
5.Join the two profiles together 6.Hold under pressure
ends.This technique, which precludes the need for specially modified pipe ends or couplings, produces a permanent, economical and
flow-efficient connection. Field-site butt fusions may be made readily by trained operators using specially developed butt fusion
machines that secure and precisely align the pipe ends for the fusion process. The six steps involved in making a butt fusion
joint are: 1.Securely fasten the components to be joined 2.Face the pipe ends 3.Align the pipe profile 4.Melt the pipe interfaces
5.Join the two profiles together 6.Hold under pressure
Compression Fittings
A. Chamfer the pipe with beveler tool.
B. Slacken the ring nut without removing from the body. Check that O-ring
and clip ring are in proper position.
C. Insert the pipe end without tightening the ting nut.
Push the fitting until the pip overstep the O-ring and reaches the stop.
D. Hand tighten the ring nut then tighten further with a strap/chain wrench.
B. Slacken the ring nut without removing from the body. Check that O-ring
and clip ring are in proper position.
C. Insert the pipe end without tightening the ting nut.
Push the fitting until the pip overstep the O-ring and reaches the stop.
D. Hand tighten the ring nut then tighten further with a strap/chain wrench.
Electro Fusion Joint
This technique of heat fusion joining is somewhat different from the conventional fusion joining.The main difference between
conventional heat fusion and electro fusion is the method by which the heat is applied. In conventional heat fusion joining, a
heating tool is used to heat the pipe and fitting surfaces.The electro fusion joint is heated internally,either by a wire coil at
the interface of the joint or, as in one design, by a conductive polymer.Heat is created as an electric current is applied to the
conductive material in the fitting. General steps to be followed when performing electro fusion joining are: 1.Prepare the pipes
2.Clamp the fittings and pipe(s) 3.Apply the electric current 4.Cold and remove the clamps
conventional heat fusion and electro fusion is the method by which the heat is applied. In conventional heat fusion joining, a
heating tool is used to heat the pipe and fitting surfaces.The electro fusion joint is heated internally,either by a wire coil at
the interface of the joint or, as in one design, by a conductive polymer.Heat is created as an electric current is applied to the
conductive material in the fitting. General steps to be followed when performing electro fusion joining are: 1.Prepare the pipes
2.Clamp the fittings and pipe(s) 3.Apply the electric current 4.Cold and remove the clamps
Manufacturing Technique
Certifications
Why Choose Us
FAQ:
Q1. Are you trading company or manufacturer?
A: We are professional manufacturer and welcome to your visit at any time.
Q2. How long is your delivery time?
A: Generally it takes 5-10 days if the goods are in stock, which depends on your quantity and can be negotiable.
Q3: Do you provide samples?
A: Yes, of course, samples is available for small quantity we can supply for free.
Q4: What is your terms of payment?
A: L/C, Western Union, T/T 30% in advanced, balance before shipment.
Q5: For pipe fittings, what do you do mainly?
A: For fittings, coupling(socket), elbow,tee,reducer,union, valve,cap,some electrofusion fittings and compression fittings.
Q6: Can i have my own logo on the product?
A: Yes, sure, you just send us your drawing, we'll make logo for you, and before production we will confirm with you in advance.
Q7: Can i request to change the method of package and transportation?
A: Yes, the packing and trasportation can be as per your requirements.
No desirable products?
Sourcing assistant>
How to start your business
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier
Related Categories
CompositePipesElectronicPlasticHomeAppliancePlasticOtherPlasticProductsPlasticSheetsPlasticTubesPopular Searches
agricultural pesticide sprayeragricultural spraying droneagricultural cratesagricultural mesh bagsagricultural rubber bandsagricultural sheltersagriculture stickeragricultural gps trackeragricultural trailer axleagricultural machine ripperagricultural shade netagricultural pipe rollagricultural waste machinewholesale holistic productsagricultural crawler tractorsagricultural water filtersagricultural trackagricultural water filteragricultural spray water pumpsagricultural soaker hoseafrican hair productsagriculture waste shredderagricultural gearbox priceagricultural flat beltstructural glass columnsagricultural shade netagricultural chain harrowsagricultural cultivatorshousehold kitchen plastic productsagricultural gearbox priceorganic natural hair productsagricultural machinery in dubaiagricultural lime priceagriculture waste shredderagricultural hand glovesagricultural water trailerspearl plastic productsagricultural machinery partsagricultural truckagriculture plastic bag