Tool Free Plastic 2 5" USB 3.0 to micro PATA external hard drive enclosure case
Description:
Connect any 2.5" Serial ATA/SATA Notebook Hard Drive externally to your computer through an available USB 2.0 port. Transfer data quickly and easily through USB 3.0 at speeds of up to 5Gbps. It is constructed from durable aluminum, to ensure heat dissipation, protecting your drive from overheating; A perfect solution for data transfers or data backup!
Features:
* Supports Standard Notebook 2.5″ SATA and SATA II Hard drives.
* Transfer Rates Up to 5Gbps when connected to a USB 3.0 port.
* Ultra Light Aluminum Case provides heat dissipation.
* LED light indicates Power and Activity status.
* Hot-swappable, plug and play, no drivers needed.
* Backwards-Compatible with usb 1.1
Specification :
(1)Color: black,red,blue,yellow
(2)Case material: Plastic
(3)Data Transfer:USB 3.0 Up to 5Gbps
(4)Internal Interface: SATA
(5)Support 2.5" SATA HDD up to 4T
(6)Package contents:Hdd enclosure,USB 3.0cable,Manual
(7)Power directly from USB power
(8)Stylish and lighted gives best solution for mobile user
(9)Plug and play with USB connection
(10)Requirements:Win SE / ME / 2000 / XP, and Macintosh OS 9.0 or later
Product Show :
System requirements:
* Available USB 3.0 port on the computer.
* Win: 2000/XP/Vista/7/8/10 (Both 32-bit & 64-bit versions)
* MAC: OS X
Package Contents:
* 2.5 Inch Hard Drive Enclosure.
* USB 3.0 cable (Data and Power)
* User manual
Shipment:
For sample order,UPS,Fedex,DHL and other Express for choose,it usually takes 3-5 days.
For Batch order, We can flexibly arrange Air or Sea shipment according weight of products.
Payment:
For sample order, Paypal and West Union can be choose.
For batch order,TT support.
Advantage:
Company introduction:
Blueendless Electronics Company was founded in 2004 as OEM manufacture of HDD Enclosures,WiFi HDD Enclosure,Power banks,Wireless power banks & chargers,etc... Our products are with superior quality,and were sold to all over the world. Our production is 10000pcs per week,and with our expert in design,we can provide products with good package to all kinds customers
Company Overview:
1. My computer system is WIN98. Why can’t my computer identify my USB disk? |
A: Startup the computer, enter the BIOS setup, check whether the relevant options of USB in BIOS are opened: set OnChip USB as Enabled; set USB Controller as Enabled; set PNP OS Installed as YES; set Assign IRQ For USB as Enabled. USB device to make preparations for the system to identify USB device. To use it in WIN98 system, a correct driver needs to be installed; otherwise it cannot be identified by the system. The driver can be obtained in the attached CD or related website. |
2. Why is my USB disk clicking and cannot be identified? |
A: It is likely the USB interface is lack of power supply. The power of USB disk is large and requires rigid voltage. The front USB interface is connected to the computer via cable and consume large amount of voltage while transferring. Therefore, it is advised to connect the USB disk to the USB interface of the rear mainboard. It is also possible that the front USB wire is connected in a wrong way. Provided that there are two AM heads at the matched USB wire, both AM heads can be connected to the computer to try if it works. It is suggested to use the matched USB wire provided by the factory since the USB wire with poor quality or large length can affect regular service. |
3. My computer cannot identify the USB disk, or it can identify the icon of the USB disk but cannot open it or use it. Further more, whenever the USB disk is plugged in the system works slower. Why is that? |
A: It should be because of the USB lack of power supply. Please connect to AC adapter if the USB disk has DC power adapter. If there is no DC adapter jack, it is suggested to connect to a USB HUB with power supply (i.e. a USB HUB with DC power supply) in order to offer sufficient power supply. |