1kw-20kw pure sine wave inverter solar hybrid inverter
1kw-20kw pure sine wave inverter solar hybrid inverter
SANDI SDP series Low Frequency Off Grid Pure Sine Wave Inverter is one of the most advanced
DC to AC conversion products in the world. It’s widely used for solar energy, wind turbine and
other renewable energy systems, also suitable use in the mountains, pastoral, border, island,
vehicles, ships and other areas without electricity which can provide and guarantee effective
power supply. It has the main advantages of high quality sine wave AC output, microcomputer
control, humanness design, high efficiency, low no-load loss and no pollution. The inverter can also supply AC power to all kinds of electric equipment, air conditioners,electric
motors, refrigerators, fluorescent lights,televisions,electric fans and other industrial power supply.
Technical Features:
1.Using the fifth generation efficient IPM intelligent module from Japanese Mitsubishi, It with powerful protection function for short circuit, over load and over temperature which is more safe and reliable. Longer service life can up to 15-20 years or more.
2. Intelligentized, modularized and simple structure design, very easy and convenient for
maintenance.
3. Two kinds of start mode: Step Down Voltage Start and Variable Frequency Start.
Variable Frequency Start is suitable for inductive load with big instant inrush current(such as
motor), inverter’s power not need enlarge too many times when take motor induction load. This
function save the cost of frequency converter’s usage, easy to connect wires and control.
4. The output frequency 50Hz/60Hz can be set via LCD panel.
5. The output voltage can be set between -40 % to +20 % of rated voltage. And the accuracy of output voltage is very high less than 1%.
6. The DC input voltage range can be set. over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point and under voltage recovery time all can be set via the LCD panel.Convenient for increasing or reducing the quantity of batteries and solar panel in the future.
7. Wide input voltage can be selected from 100-400v or 300-850v. This wide voltage input off grid inverter can work without battery and solar charge controller, which save battery cost and same like with MPPT function can maximum make full use of solar power.
8.Pure sine wave output. with good transient response less than 50MS, little harmonic
distortion, higher conversion efficiency and stable output voltage.
9. Low frequency transformer, which ensure the AC busbar and DC busbar are completely
isolated, inverter with higher efficiency >94% and very little no-load loss.
10.Powerful data display and fault instruction function. LCD can display the DC input
voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display.
11. AC bypass input function optional: Battery Power Priority or AC Bypass Priority work mode
can be set.
12. RS485 remote monitoring function optional
13. Solar charge controller and AC to DC battery charger built in optional for customer
14. Can be customized to customer’s specification.
[Optional]
- RS485 remote monitoring
- AC Bypass input
- Built in solar charge controller and AC to DC battery charger
Parameters:
Model | SDP-20KW | ||||
Isolation mode | Low Frequency Transformer | ||||
DC Input | Rated voltage (Vdc) | 220V | 240V | ||
Rated current(A) | 91A | 83A | |||
AC Output | Rated output power | 20KW | |||
Output waveform | Pure Sine Wave | ||||
Rated Voltage | 220V±3% | 110/220VAC±3% | 380VAC±3% | ||
Phases | Single phase | 2 phase 3 wire | 3 phase 4 wire | ||
Rated current (A) | 91A | 91A (phase current) | 31A (phase current) | ||
Frequency | 50Hz or 60Hz | ||||
Rated output voltage range (V) | 110/120/220/230/240/380/400/415/440VAC optional | ||||
Phases | Single / Two/ Three phase optional | ||||
Power Factor (PF) | >0.95 | ||||
Overload Ability | 150%, 5 seconds | ||||
Efficiency | >94% | ||||
Waveform distortion rate (THD) | <3%(Linear load) | ||||
Dynamic Response (0 to 100% load) | 5%, ≤50ms | ||||
Display | LCD | ||||
Running mode | Working continuously | ||||
Electrical insulation properties | 2000Vac, 1 Minute | ||||
AC Bypass Function | Optional | ||||
Solar Charge Controller built in | Optional | ||||
AC to DC battery Charger built in | Optional | ||||
RS485 remote monitoring | Optional | ||||
Wide voltage input 100-850VDC(optional) | Off grid inverter can work without battery | ||||
Protection Function | Protection | Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc. | |||
Cooling method | Fan-cooled | ||||
Short-circuit protection | No automatic recovery, need to restart the machine | ||||
Working environment | Noise ( 1 meter) | ≤50dB | |||
Degree of protection | IP20(indoor) | ||||
Working Altitude (m) | ≤2000 | ||||
Working temperature | -25~+55℃ | ||||
relative humidity | 0~90%,non-condensing | ||||
Mechanical dimension | Depth* Width * Height | 600x700x1000mm | |||
Weight (Kg) | 180Kg | ||||
Certification | European CE(EMC & LVD), SAA | ||||
Welcome OEM service
MOQ=1 pc
Short delivery time
Can be custom made
Direct Factory Selling, top engineers and professional sales team, supply you High Quality, Competitive Price and Best Service!!!
40KW Off Grid System Video Link: https://www.youtube.com/watch?v=QNxIN9RsJ6Y&feature=youtu.be
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier