25kg.cm digital 180 degree servo | ||
Model | FT5325M | |
Size | 55*20*43mm | |
Weight | 67土1g | |
Gear type | Steel Gear | |
Limit angle | NO limit | |
Bearing | Ball bearings | |
Horn gear spline | 25T/5.9mm | |
Horn type | Plastic, POM | |
Case | PA+Aluminium | |
Connector wire | 30CM | |
Motor | Core Motor | |
Operating Voltage Range | 6V-7.4V | |
Idle current (at stopped) | 6MA@7.4V | |
No-load speed | 0. 151sec/60°@7.4V | |
Running current(at no load) | 120mA@7.4V | |
Peak stall torque | 25kg.cm@7.4V | |
Rated torque | 8.3kg.cm@7.4V | |
Stall current | 3.5A@7.4V | |
Command signal | Pulse width modification | |
Amplifier type | Digitalcompara tor | |
Pulse width range | 900~2100usec | |
Stop position | 1500 sec | |
Running degree | 180° Continuous Rotation | |
Dead bandwidth | +/-25 μsec | |
Rotating direction | Counterclockwise (在1 500→2000μ sec) |