1U WDM Integrated Transmission Platform With Network Management Interface Module With AC DC Power Supply
Products description
1U chassis adopt a new design, single chassis supports 2 general service slots +1 network management slot, front panel of each service card unit can be flexible access, not limited by slot. There are many kinds of service unit card, single card integrated more interfaces, the same system capacity, have higher equipment compactness, smaller footprint, improve system integration, effectively saving computer room space. There are 3 slots in the chassis and 2 front and 1 behind. The front all can be equipped with service cards. The NMC card only can be inserted into the slot on the right side of the front panel or the slot on the behind panel.All slot support card hot-swappable. At present, the card supported by the chassis are: NMU network management card, OTU service card, OEO card, ODM multiplexer / demultiplexer card, OSU card, EDFA service board, OLP optical line protection card, OSS card, DCM dispersion card.
Future
Flexible networking, smaller footprint, with super-scalability.
Support CWDM / DWDM / EDFA / OLP/ OBP etc Multi model services card hot-swappable.
Support unified management all services cards, also support each service card individually controlled or managed.
Support single fiber unidirectional, single fiber bi-directional, dual fiber bi-directional, ring network etc variety of networking methods.
1 + 1 dual power supply redundant backup, support hot swappable. Support AC and DC power supply optional.
Good thermal design: In addition to power supply box itself cooling fan, the chassis built four high-performance cooling fan, to ensure the reliability of equipment operation.
The maximum can support 2 services cards and 1 network management cards.When you install a service card, the NMU card inserted into the slot on the right side,When you install 2 service cards, the NMU card inserted into the slot on the behind side.
System parameters
Parameters |
Technical specification |
|
Wavelength range |
Conforms ITU-I G.694.1, ITU-T G692, ITU-T G.695 standards |
|
Service access type |
PDH ,ATM FE,GE,10GE FICON/ESCON/FIBER Channel/CATV |
|
Optical interface transmission method |
2.5Gbit service card adopt 2R transmission mode,each channel supports transparent transmission below the rate of 2.5Gbit / s. Adopt 3R transmission mode,each channel rate supports 155Mbit / s, 622Mbit / s, 1.25Gbit / s or 2.5Gbit / s optional, 10Gbit service cards adopt 3R transmission mode, each channel rate supports 1.25Gbit / s, 2.5Gbit / s, 4.25Gbit / s, 6.25Gbit / s, 8.25Gbit / s, 10Gbit / s optional; |
|
Physical network topology |
Point to point, point to multipoint,chain, ring, single fiber bi-directional |
|
Fiber type |
G.652 G.655 (G.653 no advocated) |
|
Network management methods |
CLI ,TELNET,SNMP,WEB |
|
Mechanical parameters |
physical dimension |
1U chassis:44(H)*350(D)*438(W) (mm) |
weight |
Full with a weight of not more than 25 kg |
|
Working environment |
Operating temperature |
-10℃– 60℃ |
Relative humidity |
5% – 95% no condensation |
|
Storage environment |
Ambient temperature |
-40℃– 80℃ |
Relative humidity |
5% – 95% no condensation |
|
Power requirements |
220V AC,50Hz or -48V DC |
|
Safety and EMC |
Conforms FCC, UL, CE, TUV, CSA standards |
|
Power consumption |
≤60W |
More Question :
1. Can I have a sample order?What is your MOQ?
Yes, we welcome sample order to test and check quality. We do not have MOQ,1 sample is available.
2. What is the lead time?
For usual products,We keep stock,could ship about 3 days after received payment.For big quantity and special products,Please check lead time with our sales representative.
3. How do you ship the goods and how long does it take arrive?
We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive.
4. What is your payment terms?
Usually,we need prepayment by T/T,West Union or Paypal.
Could also support L/C,Credit terms.
5. What is your warranty time
We promise 3 years warranty for all products shipped from us.
6. Could I return the products if there is a quality problem?
Yes,if there is a quality problem happen,we could accept free exchange.
7. Could i use our own logo and label?
Yes,we could provide a OEM service and make the products with your own label.