1GE+3FE+ WIFI + RF/CATV GPON HGU, HOME GATEWAY UNIT
1GE+3FE+ WIFI + RF/CATV GPON HGU, HOME GATEWAY UNIT
GPON/EPON ONU INTRODUCTION
1)xPON adaptive GPON and EPON mode supported
2)Protocol: GPON- G.984/ G.983 code ; EPON- 802.3-2005/CTC
support G.711, G.722, G.729 and T.38 coding and encoding protocol
3)support VoIP, wifi bgn or CATV(see detailed model function)
4)support L2/L3 multicast forwardingL2 bridge forwarding
L3 router forwarding
NAT/NAPT
5)support flexible traffic classification;
6)support HQoS (Hiberarchy Quality of Service)
Data Process
1. Support two-way linear speed data forwarding, support 256 MAC Address Table
2. Support 802.3 SNAP and Ethernet II package, supporting 802.1P/Q priority definition, IP DSCP field, ACL definition based priority
3. Support tag identification,modify and add; support protocol message identify and capture
4. Supports ACL rule(supporting MAC/IP/TCP/UDP/ICMP /IGMP /IPv6 format )
5. Ethernet support adaptive or manual rate and full/half duplex
6. Support 802.1x certificate, STP /RSTP protocol
7. Traffic control based on ingress ; support QoS function
| Model | xPON | LAN | VoIP | wifi | TV | USB |
| JZOG-3404 | EPON/GPON | 1GE/3FE | NA | 2T2R | NA | NA |
| JZOG-3407 | EPON/GPON | 1GE/3FE | 1 | 2T2R | NA | 1 |
| JZOG-4404 | EPON/GPON | 1GE/3FE | NA | 2T2R | 1 | NA |
| JZOG-4407 | EPON/GPON | 1GE/3FE | 1 | 2T2R | 1 | 1 |
| JZOG-6404 | 1GE/3FE | NA | 2T2R | 1-WDM | NA | |
| JZOG-3202 | EPON/GPON | 1GE/1FE | 1 | NA | NA | NA |
| JZOG-1120 | EPON/GPON | 1GE | NA | NA | NA | NA |
| Datasheet | |
| Connector type | SC/PC |
| PON No. | 1 |
| Fiber mode | Single fiber |
| Wavelength | Transmitting port:1310 +/-20nm, Receiving port:1490 +/-10nm |
| Portocol | GPON: ITU-T G.984.1/2/3/4; EPON: 802.3-2005 and CTC EPON |
| Speed | GPON: download 2.488Gbit/s, upload 1.244Gbit/s; EPON: symmetric 1Gbit/s |
| Output optical power | Min. 0dBm; max. +4dBm |
| Receiver sensitivity | Better than -27dBm |
| Receiver optical power | Min. -3dBm |
| Damaged threshold value | 7dBm |
| Optical link length | Max. 20km |
| CATV optical receiver index and parameters | |
| Optical part | |
| Optical wavelegth | 1200~1650nm |
| Receiving optical power | -20 ~ -6dBm |
| Reflection loss | ≥50dB |
| Optical connector | FC/APC |
| Fiber mode | Single fiber or Double fiber |
| Isolation (WDM) | Forward path≥40dB,Reflection path≥22dB |
| RF part | |
| Frequency range | 45 ~ 1000MHz |
| Output reflection loss | ≥14dB |
| Rated output level | ≥72dB OMI=3.5%, |
| MER | 32.6 dB@ -15dBm |
| ATT range | -18—0dB |
| C/N | ≥ 51dB |
| C/CTB | ≥ 65dB |
| C/CSO | ≥ 61dB |
| Output resistance | 75Ω |
| Others | |
| Power supply(DC) | DC 12V 0.8A |
| Power loss | ≤1.5W |
| Working tempreturer | -10 ~ +45℃ |
| Storage tempreture | -40 ~ +75℃ |
| Ralative humantity | max.95%% |
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier