laboratory water purification General Introduction:
RO series deionizer water machine use deeply treatment, reverse osmosis( hard water with two
grade reverse osmosis technology), ion exchange system, ultrafiltration,
V lamp etc multi-level procedures, through the deionzier,
could directly change city tap water into pure wtaer and supper pure water, could meet different
laboratory requirement. Each equipment has two grade water output.
Certificates: ISO9001:2008; CE certificate
Equipment General Functions:
Ø RO ( Reverse Osmosis) Technology to produce lab used ultra pure water
Ø RO membrane and ultrapurified column are imported world first quality
Ø Imported supper silence compressor, run 10,000 hours
Ø Have RO water outlet and UP water outlet, two levels output water port in one machine
Ø UP water electrical resistivity(us/cm) is on-line monitoring
Ø water temperature is on-line monitoring
Ø Ultra pure water flow: 5L--20L/hr
Ø Ultra pure water instant flow: 1--2L
Ø RO system has auto and manual,timing cleaning function, effectively protecting RO membrane’s life.
Ø LCD display for time, monitoring and alarms.
Ø Alarms for: short of water, less pressure, full water tank, consumables invalidation
Ø Produced ultra pure water quality if less, will automatically go internal recycle condition to further purify
Ø Using airtight sterile water tank to avoid second pollution
Ø Low energy consumption\water saving\double mute,It needs no special man to care.
Ø USA Imported high capacity resin purification technology to guarantee water quality
Ø All original devices use imported components and are controlled automatically by microcomputer.
Ø Suitable to use all kinds of input water resources.
Ø Two stages RO membranes for special areas
Ø Pollutant entrapment rate >99%
Ø Whole machine no noisy, no heating, low power consumption
Ø Could be installed at table or hall on the wall.
Ø Have 3.2G vacuum water tank
Technical Figures 1. Basic Reagent Type (A series)
Model Name | FBC0501/02 | FBC1001/02 | FBC1501/02 | FBC2001/02 |
Inlet Raw Water | 0.15--0.5MPa pressure; 5--400C Temp RO single stage-01: Tap water(TDS≤200ppm); RO two stages-02: Tap water(TDS>200ppm) | |||
Water Production | 5L/hr | 10L/hr | 15L/hr | 20L/hr |
Instant Water Flow | 1--2L/min | |||
Output Water | Resistivity: 18.25MΩ.cm; Conductivity: ≤0.055μS/cm | |||
TOC | ≤10ppb | |||
Bacteria | <1CFU/ml | |||
Reactive silica | <0.01mg/L( SiO2 account) | |||
Particles(>0.22μm) | <1piece/ml | |||
absorbance | <0.001 ( 254nm, 1cm optical path) | |||
Input Voltage | 220V/50HZ or 110V/60HZ | |||
Power Consumption | 50--400W | |||
Size | Equipment: 380*160*580mm | |||
Weight | N.W: 20kgs G.W: 40kgs |