1650C 150kg steel copper aluminum melting furnace with water cooling system
1.Aluminum Melting Furnace Applications: used for steel,iron ,copper ,aluminum melting before casting.
2.Melting Induction Furnace Features: fast speed of melting, saving energy, less burnt loss, pure molten liquid.
3.Induction furnace's aluminum frame is adopted to small capacity melting furnace with reasonable structure and small capacity, convenient installation and simple maintenance, low maintenance cost.
4 .Aluminum Melting Furnace steel structure ( frame structure and cylinder structure ) is adopted to large capacity electric melting furnace which is equipped with magnetic yoke. The yoke will shield and reduce magnet leakage and prevent furnace body from over-heating, thus will improve efficiency and sustain the induction coil at the same time. Such will enhance the strength and reduce noise.
5.Furnace induction coils of fast melting furnace are double paralleled winded with prolonged coil to make sure the half capacity of furnace molten liquid can be heated by full load power output which will improve overall efficiency. Cooling system is equipped along with the induction coil prolong the lining life.
6.Furnace inner wall of induction coil of large capacity electric furnace is cast with imported high temperature resistant insulation material to prevent of furnace lining leakage.
Technical parameter of Aluminum Melting Furnace Series:
Model | Loading capacity(kg) | IF power (kw) | supply voltage(V) | IF-FRE (Hz) | Melting Rate(kg/h) | Power consumption (KWh/kg) | Rated power of transformer(KVA) |
GW-0.05 | 50 | 60 | 380/400 | 1000 | 45 | 0.56 | 63 |
GW-0.1 | 100 | 120 | 380/400 | 1000 | 85 | 0.56 | 100 |
GW-0.15 | 150 | 200 | 380/400 | 1000 | 125 | 0.55 | 160 |
GW-0.25 | 250 | 300 | 380/400 | 1000 | 200 | 0.55 | 250 |
GW-0.35 | 350 | 400 | 380/400 | 1000 | 300 | 0.67 | 315 |
GW-0.5 | 500 | 550 | 380/400 | 1000 | 350 | 0.67 | 400 |
GW-0.75 | 750 | 780 | 380/400 | 1000 | 500 | 0.67 | 500 |
GW-1 | 1000 | 1100 | 380/400 | 1000 | 800 | 0.67 | 800 |
GW-1.5 | 1500 | 1600 | 660 | 500 | 1200 | 0.61 | 1000 |
GW-2 | 2000 | 2000 | 660 | 500 | 1600 | 0.61 | 1250 |
GW-3 | 3000 | 3000 | 660 | 500 | 2400 | 0.61 | 2000 |
GW-4 | 4000 | 4000 | 660 | 500 | 3200 | 0.6 | 2500 |
GW-5 | 5000 | 5000 | 950 | 300 | 4500 | 0.6 | 3150 |
GW-6 | 6000 | 3300 | 950 | 300 | 5400 | 0.6 | 3500 |
GW-10 | 10000 | 3900 | 950 | 300 | 9000 | 0.56 | 4000 |
GW-15 | 15000 | 5000 | 950 | 300 | 13500 | 0.56 | 6300 |
GW-20 | 20000 | 8000 | 1000 | 200 | 18000 | 0.5 | 8000 |
1.Aluminum Melting Furnace Body and Induction Coil:
2. Power Control Cabinet of Aluminum Melting Furnace:
3. Aluminum Melting Furnace Compensation Capacitor of Induction
Water cooling system: