Spark plasma sintering furnace (SPS) (20t, 1600 ℃)
Plasma spark sintering (spark) is a new technology for rapid consolidation of powders. SPS uses a high current pulse power supply to stimulate and promote the consolidation and reactive sintering process. Compared with the traditional technology, SPS can adjust the density of all kinds of conductor, non conductor and composite materials to any required value.
SPS shortens the experimental time and energy consumption to the greatest extent, while maintaining the micro nano structure perfectly. Therefore, since its birth, it has rapidly become an important tool in scientific research, new material research and development, industrial production and other fields
The highest temperature of spark plasma sintering system can reach 1600 ℃. It can be used for material annealing, material hot pressing bonding, surface treatment and synthesis, etc. The samples can be metals, ceramics, nano materials and amorphous materials. This device is especially suitable for the research of solid electrolyte and thermoelectric materials
Specification
Configuration |
ü Stainless steel vacuum chamber ü Hot pressing system ü DC pulse power supply ü Vacuum system ü Hot pressing control system |
Power |
20 KVA |
Input Voltage |
AC380V 50 Hz Three Phases |
Output Current |
DC 0~1500 A (Digital Controlled) |
Output Voltage |
DC 0~10 V (Digital Control) |
Pulse Frequency |
5~255 ms Adjustable· 2~1000 Hz adjustable |
Maximum Tem |
ü 1200ºC with K-type thermal couple· ü 1600ºC with B-type thermal couple ü Two types of thermal couple are included |
Temp controller |
ü Precision Eurotherm temperature controller is built in· ü At the fastest heating rate, the over-temp is less than 3℃· ü Temperature accuracy : < 0.1ºC |
Hydraulic Press |
ü Manual operated hydraulic press to apply pressure.· ü Max pressure: 20 T· ü Digital Pressure guage is built in with over-pressure alarm. |
Sintering Die Set Dimension |
ü Equipped with hot isostatic graphite mould (made in Japan) ü Diameter of die core: 12-50mm (customized according to customer requirements) ü The maximum allowable pressure is 50MPa, and the maximum allowable pressure is determined by the diameter of the mold core |
Sintering Stroke |
100 mm |
Vacuum Chamber |
ü Square stainless steel cavity body ü Double-layer cavity, which needs to be supplied with cooling water |
Max Vacuum Level (Room Temp) |
ü 10 Pa (7.5 x 10^-2 torr) with the mechanical pump· One double stage mechanical pump is included· ü 1 Pa ( 10x10^-4 torr ) with optional turbo pump ( click picture below right to order ) |
Max Heating Rate |
300ºC/min |
Water Cooling |
a circulating water cooling machine with a flow of 58L/min |
Standard Accessories |
ü SPS Sintering Graphite Die Set· ü Graphite Spacer· ü K & B type Thermal Couples· ü rings· ü Clamping Tool |
Dimension |
Power Supply :760 L X 460 W X 1820 H, mm Furnace:970 L X 720 W X 1400 H, mm |
Compliance |
CE certified· |
Warranty: |
One year limited warranty |
Founded in 2005, Zhengzhou Tainuo Film Materials Co., Ltd. is a company specializing in the development and production of laboratory technology research equipment. The products are mixed, pressed, burned, cut, ground, polished, coated, analytical equipment and related consumables. Products include laboratory sintering equipment, coating equipment and so on. At present, it has been exported to 25 countries and regions such as the United States, Europe, and Southeast Asia, and has been well received by various scientific research units.
We have a mature technology research and development team, the number of technicians is 33, the company has 150 people, more than 500 square meters of office space, the factory covers an area of about 1,500 square meters located in Zhengzhou High-tech Zone Electronic Industrial Park. The products are mainly located in the research market, serving scientific research in the labs of universities and colleges, and can also customize products according to your needs.
Q. Are you a manufacturer or a trading company?
A. We are professional laboratory instrument manufacturers, have their own design team and factory, have mature technical experience, and can guarantee the quality of products and the optimal price.
Q. How is your company's product after-sales service system?
A. The product warranty period is 12 months, we can provide lifetime maintenance. We have professional pre-sales and after-sales departments that can respond to you within 24 hours to resolve any technical issues.
Q. How long is your delivery time? If I want to customize the instrument, how long does it take?
A.1. If the goods are in stock, it is 5-10 days. 2. We can provide customized services for our customers. It usually takes 30-60 days depending on the specifications of the custom instrument.
Q. Our country's power supply and plug are different. How do you solve it?
A. We can supply a transformer and plug according to your local requirements according to the power plug of different countries.
Q. How to pay?
A.T / T, L / C, D / P, etc., it is recommended to use Alibaba Trade Guarantee.
Q. How is the package of goods? Delivery methods?
A.1. Standard export fumigation sign wooden box packaging 2. Express, air, sea shipping according to customer requirements, find the most suitable way.
More questions, please contact customer service