TS-5740 four–circuit digital display controller adopts surface mounting technology and automatic placement machine production with strong disturbance resistance capacity. The controller supports input of several kinds of signals and can be used with a variety of sensors and transmitters to realize measurement display of temperature, pressure, liquid level, speed, force and other physical quantity. It can display measurement signals at four channels simultaneously and be equipped with 8–channel separate alarm output or 4–channel separate alarm output, RS485/232 communication and other output functions, thus suitable for systems to carry out inspection of synchronous measurement of multi–points.
II.Technical Parameters | |||||||
Input | |||||||
Input signal | Current | Voltage | Resistance | Couple | |||
Input impedance | ≤250 Ω | ≥500 Ω | |||||
Maximum input current | 30 mA | ||||||
Maximum input voltage | <6 V | ||||||
Output | |||||||
Output signal | Current | Voltage | Relay | 24 V distribution or feed | |||
Allowable output load | ≤500 Ω | ≥250 KΩ | |||||
(Note: Higher load capacity necessitates change of the module) | AC220 V/2A | Voltage | Relay | 24 V distribution or feed | |||
DC24 V/2A | ≤30 mA | ≥250 KΩ | |||||
Comprehensive parameters | AC220 V/2A | ||||||
Measurement accuracy | 0.2%FS±1 word | ||||||
Setting mode | Soft touch panel keys for data setting; set parameter values locked with password; set values eternally saved upon blackout | ||||||
Display mode | –1999~9999 for display of measurement values, set values and working status of light emitting diode | ||||||
Operating environment | Ambient temperature: 0~50 °C; relative humidity: ≤85% RH; avoiding strong corrosive gas | ||||||
Operating power source | AC 100~240 V (switch power supply) (50–60 HZ); DC 20~29 V (switch power supply) | ||||||
Power consumption | ≤4W | ||||||
Structure | Standard snap–in type | ||||||
Communication | Adopting standard MODBUS communication protocol, the communication distance of RS–485 able to cover 1km and the same of RS–232 able to cover 15m |
Notes:
1. For model selection, selection of functions has to depend on the wiring diagram. As a controller of a small size has fewer terminal connectors, comprehensive functions cannot be achieved and sometimes, only one function can be selected for a set of terminal connectors.
Notes:
1. Although the same set of terminal connectors in the diagram is marked with different functions, only one function can be selected. When RS485 and RS232 are available for a set of terminal connectors, only one of them can be selected.
2. The connection terminal of unified transmitting output is on the number one output terminal.