16 CFR1633 Flammability Testing Equipment For Customized Household Mattress
16 CFR1633 Flammability Testing Equipment For Customized Household Mattress
Product introduction:
Applicable to the evaluation of a mattress or mattress suite suffered ignition source similar to burning sheets when burning and heat release, 16 CFR 1633 U.S. federal standard, mattress and package all manufacturers and importers must conform to the standard.
Standard:
In line with 16 CFR 1633 United States Government Standard for Flammability of Mattresses 16 Part CFR 1633 for Standard the flammability open flame of mattresses sets.16 CFR 1633 mattress kit fuel standard (open flame test).
Product features:
A mattress or mattress placed on the top of the steel frame and combustion kit for the two of total calories for T 27KW type burner, the burner ignition side for 50 seconds, 70 seconds at the top of the ignition burner. In the case of fire control, instrument analysis with the flue gas generated from the collected samples, the heat release rate for continuous rule, the peak heat release rate should not exceed 200Kw, in the first 10 minutes of total heat release should not exceed 15MJ.
The U.S. Consumer Product Safety Commission (CPSC) is seeking comments and information regarding the usefulness of the ticking substitution procedure for the Open Flame Standard (16 CFR 1633). The information needed is any information pertaining to the materials, components, and methods of assembly used for compliance to the Standard for the Flammability of Mattresses and Mattress Pads 16 CFR 1632 and the Standard for the Flammability (Open Flame) of Mattress Sets (16 CFR 1633).
As you are aware, 16 CFR 1632 defines a schedule of classifications based on the results of the test and identifies the scope and application of these classifications for substituting ticking. There is no specific test procedure in the Open Flame Standard (16 CFR 1633) related to ticking substitution. The information needed includes details of materials, components, and methods of assembly currently being used to comply with both standards, in order to determine the suitability of the ticking substitution to be considered.
Additionally, CPSC staff is interested in the specifications of the components used and the availability of specified testing materials for this procedure.
Information, procedure, material information and data may be submitted to the CPSC to support improvements in material selection and testing. Please provide information to the “Office of the Secretary” By April 3, 2017.
| Product Name: |
Flammability Testing Equipment
|
| Usage: | Mattresses Fire Tester |
| Standard: | 16 CFR 1633 |
| Combustion Gas: | Propane |
| Combustion Chamber Dimension: | 3048 * 3658 * 2438 MM |
| Power: | 380V, 50HZ |
DONGGUAN YUYANG INSTRUMENT CO.,LTD is Located in Wanjiang District (Dongguan City, Guangdong Province,China),a famous historical town with prosperous industry and convenient transportation.
We are a high-tech enterprise which is specialized in developing and manufacturing Fire Testing Equipment, Building Material Fire Tester, Wire and Cable Fire Tester, Environmental Test Chamber, Textile Testing Equipment, Toys Testing Equipment and etc.
Decades of research and development strengthen the leading edge of YUYANG in this field, and established as an crucial role in R&D on high quality and high-cost performance of testing equipment. YUYANG's testing equipment are widely used in various field: scientific institutions, colleges, inspection institutions, auto parts, electronics, electricals, lithium battery, LED, photoelectricity, mobile, plastic and rubber, display, telecommunication, chemical industry, aerospace, building material and product, wire and cable, toys, furniture, textile and fabrix, etc. All YUYANG testing equipment are designed according to international test standards, such as ISO, ASTM, DIN, EN, GB, BS, JIS, ANSI, UL, TAPPI, AATCC, IEC, VDE, CSA,CEN and so on.
DONGGUAN YUYANG INSTRUMENT CO.,LTD looks forward to cooperating with customer all over the world.
If you are interested in any of our products or would like to discuss a custom order. Please feel free to contact us. We are looking forward to forming succesful business with new clients around the world in the near future.
1. who are we?
We are based in Guangdong, China, start from 2018,sell to South Asia(20.00%),Eastern Asia(20.00%),Domestic Market(15.00%),Southeast Asia(15.00%),Eastern Europe(10.00%),North America(10.00%),Oceania(5.00%),Western Europe(5.00%). There are total about 11-50 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Fire Testing Equipment,Environmental Test Chamber,Textile Testing Equipment,Toys Testing Equipment,Wire and Cable Test Machine
4. why should you buy from us not from other suppliers?
We are a high-tech enterprise which is specialized in developing and manufacturing Fire Testing Equipment, Building Material Fire Tester, Wire and Cable Fire Tester, Environmental Test Chamber, Textile Testing Equipment, Toys Testing Equipment and etc.
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW;
Accepted Payment Currency:USD,EUR,JPY,AUD,HKD,GBP,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A,Credit Card,Western Union,Cash;
Language Spoken:English,Chinese
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier