15W 35W 50W 75W Water Pump RS-003 RS-013 RS-023 RS-033

CAUTIONS

1.Always disconnect from electrical outlet before handling the pump

2.Do not let the pump run dry

3.Do not lift the pump by the power cord

4.The pump should be submersible completely

5.The supply cord of this appliance can not be replaced.If the cord is damaged,the pump should be discarded

Disconnect the appliance from power supply before putting the hands into the water

MAINTENACE

To clean the pump,please remove the front plate and impeller.Use a samll brush or stream of water to remove any debris or algaes

CAUTION:IF THE PUMP FAILS TO OPERATE,CHECK THE FOLLOWING:

Check the circuit breaker and electrical outlet to ensure that the pump is connected to power supply.

Check the shaft and impeller of the rotor to make sure that they are not stopped or jammed by any debris or algaes

TIPS:

Monthly maintenace can help prolonging the service life of the pump.The electrical cord loop should be below the electrical outlet to form a "DRIP LOOP"that can prevent the water from running down the cord and flowing into the electrical outlet.