JHTF-1400ST horizontal tube furnace adopt a 40,60, 70, 80 or 100mm O.D quartz tube and a pair of stainless steel vacuum sealing flanges with needle valves & gauge allow heating samples under vacuum or gas flow conditions. The temperature of this tube furnace is controlled by a high precision digital controller which provides 51 programmable segments with +/- 1℃ accuracy. The max. working temperature is 1400℃.

 Technical Specifications:

Ⅰ. Technical Specifications
Max. temperature	1400℃ (<2 hours)
Working temperature	700-1300℃
Standard Temperature  controlling	PID automatic control via SCR (Silicon Controlled Rectifier) power control with  phase angle fired, current limiting resistor.
	51 programmable segments for precise control of heating rate, cooling rate  and dwell time.
	Built in PID AutoTune function with overheating & broken thermocouple  broken protection.
	Over temperature protection and alarm allows for operation without attendant.
Optional of Temperature  controlling	Software (Furnace can be operated by PC by installing a control (software )
	Touch screen temperature controller
Temperature accuracy	±1 ℃
Heating rate	Heating rate<15℃/min
Thermocouple	S type (Pt-Rh) with 99.7% purity Alumina tube
Heating element	U type SiC heating element
Furnace Chamber	There layers of ceramic fiber insulation materials
	First layer: 1700℃ ceramic fiber board.
	Second layer: 1430℃ ceramic fiber board.
	Third layer: 1260℃ ceramic fiber board.
Furnace structure	Double layer steel casing with dual cooling fan, surface temperature below 60 ℃.
Vacuum system	Double stage rotary vane vacuum pump with magnetic valve to prevent the oil  absorbed to tube.
	Self-expansion type double silicon ring flange, 304 stainless steel HCP.
	Needle valve + Mechanical vacuum gauge + Discharge valve
Warranty	One year limited warranty with lifetime support.(Consumable parts such as heating elements and crucibles are not covered  by the warranty, please order the replacement at related products)
	ATTENTION: Any damages caused by the use of corrosive and acidic gases are  not under the coverage of One Year Limited Warranty.
Certifications	CE
Ⅱ.Application Notes
Using Attentions	Cooling rate shall also not exceed 5 ℃ /min.
	Toxic or explosive gases are not recommended for use with this furnace  without necessary safety controls and supervision.
	Small cracks may appear on the surface of the refractory ceramics over  extended use.
	The tube furnace is avoid use vacuum above 1500℃, otherwise the tube  will be serious deformation.

 Specification:

Any questions?Click here for more information>>

The tube furnace will be packaged by Wooden box, also can be packaged according to your requirement.industrial muffle furnace

Zhengzhou JinHe Machinery Manufacture Co., Ltd. is a professional manufacturer for mixing machine. We are an ambitious company with personality and strong ability in R&D. The double movement mixing principle that we proposed has greatly improved efficiency and save more energy. At present 3 series mixing machines that we have created all have independent intellectual property rights and national patent rights. Our innovative mixing principle is considered at the forefront of mixing technology!

Here is our official websit :http://www.asiamixer.com/, can check to get more importance information in there.industrial muffle furnace

  An experienced and well mannered sales and marketing team is committed to bringing you 100% customer satisfaction. In order to succeed in the rapidly changing podwer mixer market, our company has instituted a development policy that emphasizes "Serving the customer, improving products, providing best service,sureness and steadiness, devotion and dedication".Please feel free to contact us at any time.

Read it before leaving this page for it is helpful for you to make the right choice

1. Q: Do you have a small capacity mixer/blender of 3 liter?
A:Yes, we have small capacity mixer from 3L to 110L for lab use.

2. Q: Is it easy to clean so that we can mix/blend different powder one batch after another?
A: Yes, our lab series mixer's inside blades and barrel are all dismountable. You can clean it thoroughly by yourself.

3.Q: Is it possible to mix/blend 3 liters or 15 liters with one machine only?
A:Yes, There is 6 size barrel for 1 mixer from 3L to 18L. You can choose what you need.

4. Q: If I want to mix different powders particle size in 200mesh(74um), how long would be ok?
A:10 minutes or less upon the fluxility of the powder

5. Q: If I want to mix powder size smaller than 800 mesh(19um), would it also capable?
A:Yes

6. Q: If I want to mix light powder and heavy powder, like Mgnesita powder and Cromo powder, the light powder is easily floating on the surface of heavy powder, then the light powder can not well- dispersed. Does your mixer can slove this problem?
A:Yes, absolutely. Our double movement series mixer have unique structure over the world. The barrel rotating while the inside 8 full size helical blades rotating also. The barrel rotating like a 3D mixer. The inside helical blades can do cutting, dividing,pressing job. If our machine used to mix normal powders like milk powder,detergent powder,protein powder, etc.....it will need less time than other mixer.

7. Q: I am in food industrial, what kind of mixer/blender is better for me?
A: All parts connect to food mixture need better quality stainless steel 304/316 to prevent contaminate.

For machine's video and animation please kindly paste this website address to your browser  https://www.youtube.com/user/asiamixer