Model No. |
SAHP13000 |
SAHP8000 |
Channel Number |
4 |
2 |
Stereo rated output power at 4Ω |
4x2100W |
2x4400 W |
Stereo rated output power at 8Ω |
4x1350W |
2x2400 W |
Stereo rated output power at 16Ω |
4x550W |
2x1150W |
Circuit Category |
Class TD |
Class TD |
Output Voltage of the output module |
150V |
150 V |
Output Current of the output module |
20A |
20 A |
THD @ ≤ 1kHz,1dB |
< 0.008 % |
|
THD @ 20Hz-20kHz 1W |
< 0.05 % |
|
S/N Ratio |
> 112 dBA |
|
Cross Talk @1KHz |
> 70 dB |
|
Frequency Response @1W 8Ohm,20 Hz-20kHz |
+/- 0.05 dB |
|
Damping Factor |
> 400 8oh |
|
Input feature |
high quality input and ISO floating isolation |
|
Input resistance |
Balanced 20K / Non-banlance 20K |
|
Votage Gain |
23, 26, 29, 32, 35, 38, 41, 44 dB |
|
Bridged Output |
Channel 1 +Channel 2 : input at Channel 1 Channel 3 + Channel 4 : input at Channel 3 |
|
Input Connectors |
4×3 Pins XLR banlanced inputs on rear panel |
|
Onput Connectors |
speakon Neutrik(1 x nlt8,combined 2 x nlt4)or 4 binding posts |
|
Cooling |
four fans, front-rear airflow, temperature controlled speed |
|
Power ON/OFF Switch |
in front panel |
|
Control |
1 piece of step level attenuator at every channel |
|
Protection Functions |
amplitude limit and protections againts short circuit ,over-load, over-heat, direct current, radio-interference , on/off switching, muting ,power supply under-voltage, over-voltage and power failure. |
|
Indicators |
Independant LED light for each channel, Voltage Peak Limiter(VPL), Current Peak Limiter(CPL), Very High Frequency (VHF), High-temperature Indicator, Fault indicator, Mute indicator |
|
Soft start power supply |
Maximum 5A |
|
Stable voltage switching power supply |
Yes |
|
Baer maximum current threshold |
25 A |
|
Product Dimensions ( WxHxD) |
483x88x485 |
|
Product Net Weight |
13KG |
13KG |