Engraving Area | 1500mm *3000mm(X*Y axis) |
Laser Power | RECI W6 (130W-150W) CO2 laser tube |
Cooling Mode | Circulation water cooling and protection system |
Laser- type | Sealed CO2 laser tube |
Control System | Ruida 6445G controller with keypad number |
Table Type | Honeycomb/Knife table |
Driving System | Stepper motor and driver |
Transmission Rails | Taiwan HIWIN linear guide rails and Fulong belt |
Software | CorelDraw/AutoCAD/Photoshop/Laser cut |
Position System | Red dot |
Graphic Format Supported | BMP,PLT, DST, DXF, and AI |
Engraving Speed | 1-9000mm/min |
Cutting Speed | 1-5000mm/min |
Minimum Shaping Character | Letter 0.5mm, Chinese 0.5mm |
Power Supply | 220V±10% 50HZ,1phase. |
Resetting Positioning Accuracy | ±0.05mm |
Gross Power | <1,000W |
Operating Temperature | 0-45°C |
Operating Humidity | 5- 95% |
Attachment | Water chiller W-5200, Exhaust Fan, Air pump |
N/G weight | 1050/1200KG |
Machine size | 3750*2030*1100mm |
Packing size | 4150*2150*1350mm |
Guarantee | 18months guarantee of the whole machine. |
Software issue | Our technician is able to re-install or set up by remote for free. |
Hardware issue | Main parts(excluding the consumables) shall be replaced/repaired free of charge if there is any problem during the warranty period. |
Support online | Our technician is able to teach you online to run the machine or eliminate the fault for free. |
Training in AccTek factory | We are able to train your staff after placed order in our factory for free. |
On-site training (Recommended, the most effective way) | We are able to send technician to your workshop to do the installation and training. You will need bear the related costs.(flight,visa,hotel,training costs, etc.) |