Features:
1.LED digital display : U-I-C-P
U:battery voltage I:charge current C:7 charging stage code P:over heat protection
2.LED indicators : AGM /GEL battery
3.AGM/GEL battery charge and switching power supply mode selection
4.Numerious protection function: overheat, over charge, short circuit, soft start, internal temperature compensation, reverse polarity, over charge protection.
5.7 Stage automatically charging:
Input And Output Explanation:
Digital Display And Button:(See Vedio)
LED screen:
Shows Charging Voltage,Charging Current,Charging Stage.
Button:
Short press”STATUS SELECTION” button to see the charging voltage,charging current and charging stage you want to know in turn.
Long press “MODE SELECTION” button for 5 seconds to adjust the charger into different working mode as a switching power supply or charging for GEL/AGM/WET battery.
PS:You can also use it to charge for Lithium battery by factory set.
7 stage:
C1 | Desulphation | When battery voltage is lower than 11V,pulse charges the battery in a small current,this process lasts for 30min. |
C2 | Soft start | When battery voltage is lower than 12.6V,charges the battery in half rated charging current of the charger. |
C3 | Bulk charge | Charges the battery in full charging current of the charger,till the battery is 80% charged. |
C4 | Absorption | Charges the battery in a constant voltage and small current,till the battery is 100% charged. |
C5 | Battery test | Tests the battery’s normality.When entering into this stage,the voltage of the battery drops sharply.If the battery is functioning properly,the voltage now will be higher than 13V,then charger will enter into C7 90s later;If the voltage is less than 13V,the charger will enter into C6. |
C6 | Recondition | Charges the battery in a high voltage(15.6-16V) and small current to recondition. |
C7 | Float | The battery is fully charged now,remove the battery from the charger or leave it to charge in a float way;In float stage,the charger charges and stops every 1 min in a current of 1-2A,battery can be charged indefinitely without being damaged. |
Note:Usually,the charger begins to work from C2 or C3. |
Specification:
Model | EBC1210 | EBC2405 | EBC1220 | EBC2410 |
Input voltage | AC110V(90-165V) or AC220V(190-265V) | |||
Output voltage | 12V | 24V | 12V | 24V |
Max.charging current | 10A | 5A | 20A | 10A |
Protection function | Reverse polarity,output short circuit,over current,over voltage,overload,over heat | |||
Charging way | Automatic 7 stage charging:Desulphation,soft start,bulk,absorption,battery test,recondition and float | |||
LED display | (U-I-C-P)Output voltage,output current,charge status,overheat protection | |||
Temp.compensation | Yes | |||
Battery type | All rechargeable lead acid battery | |||
Packing | Gift box | |||
Qty/ctn | 6pcs | |||
Meas./ctn | 42.5*29*37.5cm | |||
Certification | CE,RoHS,SONCAP |
Carspa is a known brand, a leading manufacturer and exporter for off-grid which has been this industry for 13 years. Our factory was established in 2005. We provide power solution service to our clients. All of our customers are located all over the world and they are very satisfied due to our excellent price-quality ratio.
Our main products are off grid power inverter, we manufacture both kinds of inverter pure sine wave and modified sin wave inverter, we also make battery charger, solar charge controller, and other solar power system products. Our company has established a strong quality control system and finished the ISO 9000. We have obtained many international certifications like E8, CE, Rohs certifications for our products. Each product will be tested at least 5 times, and all of them are tested by the computer full-automatically and generated a test report which will be kept in the server for more than 3 years. So, we can guarantee that we always provide best service and product to our customers. We have our professional technology group in ShenZhen research center. So we can provide best technical support for our clients. We offer two years warranty for our products, so you can have faith in our product. In addition, OEM and ODM services are available.
FAQ
Q1: Can I get one for sample?
A1:Yes, we accept sample order or trial order for testing first.
Q2: What's the price and MOQ?
A2:Please just send me inquiry, your inquiry will be replied within 24 hours, we will let you know the latest price and MOQ.
Q3: What's you delivery time?
A3:It depends on your quantity, but usually, 7 days for sample order, 30-45days for batch order
Q4: How about your payment and shipment?
A4:Payment: We accept T/T, Western Union,Paypal etc. terms of payment.
Shipment: For sample order, we use DHL, TNT, FEDEX, EMS etc. express;for batch order, by sea or by air( through our forward)
Q5:How about your warranty?
A5:we provide1.5 and 2 years warranty for different products and whole life technical support.
Q6.Do you have you own factory?
A6:Yes,we are professional manufacturer mainly in power inverter for about 12 years.Our factory is located in Yueqing,Zhejiang,China.