The SF6 insulated switchgear is suitable for middle voltage power distribution system with a rated voltage of 12kV and 40.5kV. It could be used as RMUs in a power supply network, fault isolating switches and sectionalizing switches. If equipped with distribution automation devices (FTU/DTU) and communication devices, the SF6 insulated switchgear could communicate with the control center, measure the cable voltage, current, etc, and monitor the working status of switches.
• The SF6 is the insulation material which is sealed in a stainless-steel enclosure, fully-insulated and maintenance-free.
• Long life endurance.
• Obvious watchable open contacts.
• Reliable interlock and safer operation.
Item | Parametres |
Rated Voltage | 12KV |
Rated Current | 630A |
Rated Short-time Withstand Current | 20kA, 4s |
Rated Peak Withstand Current | 50kA |
1min Power Frequency Withstand Voltage | 42kV |
Lightning Impulse Withstand Voltage | 75kV |
Gas Pressure | 0.03MPa |
Mechanical Endurance | 5000 times |
Protection Level | IP67 |
Anual Leakage Rate | 0.1‰ |
1,Beijing SOJO Electric Co., Ltd. is a high-tech enterprise with strong independent innovation ability.
2, Automation production line, the robot island, the full automatic logistics systems, and sheetmetal fabrication center
3, stable product quality , supply, the good faith management
SVI solid insulated switchgear is suitable for middle voltage power distribution system with a rated voltage of less than 10kV and a rated current under 1250A.
The SF6 insulated switchgear is suitable for middle voltage power distribution system with a rated voltage of 12kV. It could be used as RMUs in a power supply network, fault isolating switches and sectionalizing switches.
The KYN28A air insulated metalclad switchgear, which is for distributing and accepting AC electricity (3-12 kV, 50 Hz) distribution system, is fitted with VD4 circuit breaker from ABB or VS1 circuit breaker from domestic company. Besides, it also can control, protect and monitor the circuit.
The ZW32-12 outdoor medium voltage vacuum circuit breaker has a rated voltage of 12 KV. It is a kind of three phase outdoor distribution facility for 50 Hz Power.
SC (B) 10/11 epoxy cast dry-type transformer is a dry-type transformer with strong mechanical strength, electrical strength, and good heat-resistance performance.