Under the same finished final size and the same motor power, the capacity of micro powder grinding mill is twice as much as jet
mill, mixing grinder and ball mill, and energy consumption decreased 30%.
Model | HGM80 | HGM90L | HGM100L-II HGM100P | HGM125L | HGM168L | |||||
Ring Diameter (mm) | 800 | 900 | 1000 | 1250 | 1680 | |||||
Ring Number (PCS) | 3 | 3 | 4 | 4 | 4 | |||||
Roller Number (PCS) | 18-21 | 24-29 | 28-36 | 30-40 | 30-44 | |||||
Main Shaft Speed (r. p. min) | 230-240 | 200-220 | 180-200 | 135-155 | 120-130 | |||||
Input Size (mm) | ≤20 | ≤20 | ≤20 | ≤20 | ≤20 | |||||
Finished Size (um/mesh) | 74-5 (200-2500) | 74-5 (200-2500) | 74-5 (200-2500) | 100-8 (150-2000) | 100-9 (150-1500) | |||||
Capacity (t/h) | 0.5-5.5 | 0.8-6.5 | 1.2-10 1.2-11 | 2.5-20 | 5-45 | |||||
Outlet Size L*W*H (m) | 15.1*4.2*7.3 | 18.4*3.9*7.8 | 22.7*3.6*8.5 | 27.3*4.2*9.9 | 31.7*7.7*12.6 | |||||
Note:The capacity is based on the domesitlc CaCO3 Powder factory's feedbackNote:The capacity is based on the domesitlc CaCO3 Powder factory's feedback |
Unit KW | HGM80 | HGM90L | HGM100L-II HGM100P | HGM125L | HGM168L | |||||
Main Unit | 75 | 2*45 | 132-150 | 185-200 | 315 | |||||
Classifier | 18.5 | 18.5-30 | 30-37 | 75 | 132 | |||||
Blower | 45 | 55 | 75 | 2*45-2*55 | 2*75-2*90 | |||||
Crusher | 18.5 | 18.5 | 18.5 | 45 | 75 | |||||
Bucket Elevator | 3 | 3 | 4 | 4 | 7.5 | |||||
BeltConveyor Feeder | 1.5 | 1.5 | 1.5 | 1.5 | 2.2 | |||||
Discharging Valve | 2*0.75 | 1.1 | 1.1 | 1.5 | 2*1.5 | |||||
Air compressor | 11 | 15 | 22 | 37 | 55 | |||||
Note:For the data with prefix such ad "2xx",which means there are two same motors configured for one item |