120mm2 150mm2 185mm2 240mm2 300mm2 PVC Insulated and Sheathed NYYHY Fine wire Flexible Power Cable
120mm2 150mm2 185mm2 240mm2 300mm2 PVC Insulated and Sheathed NYYHY Fine wire Flexible Power Cable
1.Applications
Low Voltage XLPE insulated (fire resistant) power cable uses XLPE insulation and PVC sheath that are both fire-resistant. Compared with common PVC insulated type, it features stable performance and good fire-resistant property. Meanwhile, it is cheaper than the XLPE insulated type with same specification. Thus, it is suitable for places where good fire resistance is required but environmental requirement is not very strict.
2.Construction
Concentric strand or compressed 1350-H19 conductor, polyethylene or cross linked polyethylene insulation, concentric strand AAC, ACSR, or 6201 alloy neutral messenger
3.Character and Relevant Parameters
1. Long-term service temperature of the pvc cable conductor: 70 0C
2. Rated voltage: 450/750V
3. PVC Cable lying temperature ≥0 0C
4. Cores: 2, 3, 4, 5, 6,7, 8, 10, 12, 14, 16, 19, 24, 27, 30, 37, 44, 48, 52, 61
5. Minimun bending radius:
Non armored ≥ out diameter of cable 6 times
Armored layer or copper tape shielded ≥ outer diameter of cable 12 times
Shielded layer soft cable ≥ outer diameter of cable 6 times
4.Type& Specification
Type | Name | Section Area(mm2) | No. of Core |
KVV | Copper Conductor, PVC Insulated and Sheathed control electirc wire and cable | 0.75 1.0 1.5 2.5 | 2,3,4core-810 12 14 16 19 24 27 30 37 |
4.0 6.0 | 2,3,4core-8 | ||
KVVP | Copper Conductor, PVC Insulated and Sheathed, Copper-braid Screened Control electirc wire and cable | 0.75 1.0 1.5 2.5 | 2,3,4core-8 |
4.0 6.0 | 2,3,4core-8 | ||
KVVP2 | Copper Conductor, PVC Insulated and Sheathed, Copper-tape Screened Control Cable | 0.75 1.0 1.5 2.5 | 2,3,4core-8 |
4.0 6.0 | 2,3,4core-8 | ||
KVVP2-22 | Copper Conductor, PVC Insulated and Sheathed, Copper-tape Screened Steel-tape armored Control electirc wire and cable | 0.75 1.0 1.5 2.5 | 2,3,4core-8 |
4.0 6.0 | 2,3,4core-8 | ||
KVV22 | Copper Conductor, PVC Insulated and Sheathed, Steel-tape armored Control electirc wire and cable | 0.75 1.0 1.5 2.5 | 2,3,4core-8 |
4.0 6.0 | 2,3,4core-8 | ||
KVVR | Copper Conductor, PVC Insulated and Sheathed, Flexible Control electirc wire and cable | 0.75 1.0 1.5 2.5 | 2,3,4core-8 |
4.0 6.0 | 2,3,4core-8 | ||
KVVRP | Copper Conductor, PVC Insulated and Sheathed, Braiding shielded Flexible Control electirc wire and cable | 0.75 1.0 1.5 2.5 | 2,3,4core-8 |
4.0 6.0 | 2,3,4core-8 |
5.model and relevant datas
| Cable Model | Descriptions for Power Cable | Applications for (Fire Resistant Electric Power Cable) | |
| Cu Core | Al Core | ||
| YJL YJVR(YJRV) | YJLV | XLPE insulated and PVC sheathed (flame -retardant) power cable | This type of xlpe/pvc electric power cable can be laid indoors and outdoors, such as tunnel, cable duct, loose soil, etc. It can not bear external mechanical force, but a certain tensile force can be applied during laying. In addition, the single core type is not allowed to be installed in magnetic pipes. |
| YJV22 | YJLV22 | XLPE insulated, steel tape armored and PVC sheathed (flame-retardant) power cable | This type of xlpe/pvc can be placed outdoors, and burying in the ground is also suitable. Meanwhile, external mechanical force is applicable, but big tensile force is forbidden. |
| YJV32 | YJLV32 | XLPE insulated, thin steel wire armored and PVC sheathed (flame-retardant) power cable | This type of xlpe/pvc cable is used in water, vertical well or places with high drop height, and it can bear external mechanical force and fairly large tensile force. |
| YJV42 | YJLV42 | XLPE insulated, thick steel wire armored and PVC sheathed (flame-retardant) power cable | This type of xlpe/pvc be laid in vertical well, sea floor or places with high drop height. Pretty big positive pressure and tensile force are both applicable. |
Certifications Required:
1.When can I get the price?
We usually quote within 6 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.
2.How can I get a sample to check your quality?
After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.
3.How long can I expect to get the sample?
After you pay the freight charge and send us confirmed files, the samples will be ready for delivery in 3-7 days. The samples will be sent to you via express and arrive in 3~5 days.
4.What about the lead time for mass production?
Honestly, it depends on the order quantity and the season you place the order.The best record we keep is delivering 10 kilometers cable within a week. Generally speaking, we suggest that you start inquiry two months before the date you would like to get the products at your country.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier