Type of material | Multi layered coated film | |||||
Short name | Metallized PET + PE Film | |||||
Metallization | Inside | |||||
Thickness | The nominal thickness is determined by the total thickness of the materials: (6-12 mic) Metallized PET film + (6-25 mic) PE. The total thickness of the material: ≤ 35 mic | |||||
Finalproduct | Roll | |||||
Reel | Heat-sealing layer (PE) inside | |||||
Materialwidth | 400 - 2200 mm | |||||
NET weight | (Min) | 55 kg | ||||
(Max) | 70 kg | |||||
WidthTolerance | -2 mm / +2mm | |||||
Lateral Edges Alignment | -2 mm / +2mm | |||||
Thickness Tolerance | 6% | |||||
Splice | unit/roll | ≤ 1 | ||||
type | Metallized PET / BOPET / Transparent OPP tape Scotch width ≥ 40 mm | |||||
Splicemarking | not necessary | |||||
ID | ID material | paper | ||||
Internal diameter | 76 mm (3 inches) | |||||
ID material thickness | 12 ÷ 15 mm | |||||
ID width | Material width (0+5) mm |