Project | Parameter | Remark | |
Cell | Battery Type | LiFePO4 Battery | |
Cell Model | Cell Model LF32650-6000 | ||
Nominal Capacity | 6Ah | Discharge : 0.1C Cut-off Voltage:2.5V | |
Minimum Capacity | 5.8Ah | Discharge : 0.1C Cell Cut-off Voltage: 2.5V | |
Nominal voltage | 3.2V | ||
Internal Impedance | ≤25mΩ | ||
Battery Pack | Dimension | MAX. 32.5x71mm | |
Weight | About 141 g | ||
Pack Method | 4S34P | ||
Nominal Capacity | 200Ah | Discharge : 0.1C Cut-off Voltage:10V | |
Minimum Capacity | 197.2Ah | Discharge : 0.1C Cut-off Voltage: 10V | |
Nominal Voltage | 12.8V | ||
Energy | 2560WH | ||
Charge Voltage | 14.6V | ||
Discharge cut-off voltage | 10V | ||
Charge Method | CC/CV | ||
Standard Charge Current | 15A | ||
Max. Charge Current | 15A | ||
Standard Discharge Current | 20A | ||
Max. Continues Discharge Current | 20A | ||
Cycle Life | 2000 times | 80% Remained | |
Internal Impedance | ≤70mΩ | Lead-Acid Enclosure | |
Dimension | L521xW237.9xH217.3mm | ||
Output Wire | / | ||
Output Connector | M8 terminal | ||
Weight | Approx.22kg | ||
Working Temperature Range | Charge: 0°C--45°C Discharge: -20°C--60°C | ||
Storage Temperature | -10°C--45°C |
◎When recharging, use the LiFePO4 battery charger specifically for that purpose
◎Do not strike battery with any sharp edge parts, such as Ni-tabs, pins and needles
◎Do not immerse the battery in water and seawater
◎Do not use and leave the battery near a heat source as fire or heater
◎Do not reverse the position and negative terminals
◎Do not connect the battery to an electrical outlet
◎Do not discard the battery in fire or heat it
◎The battery tabs are not so stubborn especially for aluminum tab. Do not bend tab.
◎Do not short-circuit the battery by directly connecting the positive and negative terminal with metal object.
◎Do not transport and store the battery together with metal objects such as necklaces, hairpins etc.
◎Do not directly solder the battery and pierce the battery with a nail or other sharp object.