1.1 Overview
10KW portable Charger converts a 220Vac/380Vac voltage into DC voltage to directly charge an electric vehicle's lithium ion battery. In addition, the charger utilizes a CHAdeMO compliant communications protocol and power connector.
No matter where you go, how far it is, you can charge it anytime. Due to the light and small size, it can be put into your car charging interface.
Figure 1. SET450-20BX Appearance
1.2 Main parts
No | Name | Model | Instructions | Qty |
1 | Monitor | SET1410 | Intelligent Control Center | 1 |
2 | Power module |
| AC/DC | 1 |
3 | Metering unit |
|
| 1 |
4 | AC input |
| Input MCB | 1 |
5 | DC output |
| MCB/Relay/Diode | 1 |
6 | DC connector |
| Chademo | 1 |
1. 3 Specification
| Item | Rating and Property | Remark |
System Index | Efficiency @ full load | ≥93% |
|
OHZ~20MHz clutter VP-P | 0.20% |
| |
Insulation strength(V) | 2000VAC/50Hz | 10mA,1min No flashover | |
Insulation resistance(MΩ) | 10 | Ground | |
Power Surge | No | Soft start | |
Module load indication | LED display output DC current LED10 class | LED10 Class,+3LED | |
Output current display accuracy | ≤±10% |
| |
Communication Interface | CAN2.0B |
| |
Environmental indicators | Ambient temperature | -25℃~55℃ | Storage: -40° C to 70 ° C |
environment humidity | ≤90%(40±2 ° C) | Storage: 95% (40 ± 2 ° C) | |
Altitude | 1500m | Above 1500m, derate. | |
Electromagnetic Compatibility | EN55022 CLASS A | (YD/T983-1998)A Class | |
Input indicators | Line voltage(VAC) | 380/220 | 300-500V/175-300V |
Type of voltage | AC three-phase four-wire / single-phase |
| |
frequency(HZ) | 45~55 |
| |
Power Factor | 0.99 |
| |
Current THD | ≤5% |
| |
Input undervoltage protection value(V) | 305±15V |
| |
Output indicators | Nominal output voltage(V) | 378V |
|
Output current(A) | 0~20A |
| |
Regulation accuracy | ≤0.5% |
| |
current accuracy | ≤1% |
| |
Peak to peak ripple coefficient | ≤0.5% |
| |
Output voltage range(V) | 200~500V |
| |
Output Power | 0kW~10kW |
| |
Mechanical | Packing | Wooden or cartoon |
|
Size(W×H×D) | 420×330.5×161.5 | mm | |
Weight | <20Kg |
| |
IP | IP31 |
| |
Other | Cooling | Forced cooling | Controlled by Load and temperature |
1.4 Features
SET450-20BX is portable charger with high voltage and small current. Inner charging module is with high-efficiency, high-frequency, full-bridge three-level soft-switch technology and digital control. Equipment monitoring module is with high intelligence, improved functions, available interface.
l Max 10KW, output current limited 20A;
l Adopting intelligent charging module, module built-in CPU to realize CPU intelligent management, with manual / automatic dual control function.
l Adopting intelligent module, to be a distributed control system, a single module failure does not affect whole system operation
l Charging module adopt ZVZCS and three-level soft-switching technology, efficiency up to 95%
l Charging module adopt a unique full isolation dust structure, built-in cooling fan adopt intelligent speed control, and can automatically adjust the fan speed according to the load situation, to extend the life of the fan.
l Charging module comes with APFC function, power factor more than 0.99, the rate of total harmonic current distortion THD <5%.
Our Nissan Leaf in factory for testing before delivery.
Main Screen:
SETEC EV charger installation projects: