10kw DC fast portable EV charger for Nissan Leaf factory price
About Company
Shenzhen SETEC Power Co.,Ltd was established in 2004, has become one of the leading manufacturer in Shenzhen, China. With 15 years development, we are specialized in EV charging station,pure sine wave inverter, DC DC converter, AC DC rectifier, solar pump inverter and UPS. Relying on good quality and competitive price, our products have been exported to more than 60 countries, including 30 countries in Europe, North America, Middle East, Asia and Africa.
Our factory covers an area of over 10,000 square meters.We develop our own products and become national high-tech enterprises and get good reputation from customers.
Overview:
SETQCY series DC charging station is mainly used for electric vehicle fast charging. Products can be installed outdoors, with waterproof, dustproof design IP54. This DC fast charging station has charging interface, man-machine interface, communications, billing and other parts, modular design, easy installation, operation and maintenance and simple, and the charger with the use of electric vehicles outdoor DC fast charge ideal choice.
Product Features:
1.Intelligent module, CPU module built intelligent management, with manual / automatic dual control ;
2.Distributed control system, a single module failure does not affect system operation ;
3.Module efficiency up to 95%;
4.Charging module has a sleep function, based on the number of modules automatically select the size of the load current to start, so that the module and efficient operation ;
5.Charging module uses a unique full isolation dust structure, built-in cooling fan with intelligent speed control, and can automatically adjust the fan speed according to the load operation, to extend the life of the fan;
6.Acceptable remote trip command to achieve the emergency stop function.
7.Charging module comes with APFC function, power factor of 0.99, the total harmonic current distortion THD <5%charging
Production Description:
SETQCY DC quick charger consists of charging modules, monitor, smartmeter, HMI, communication module, charging connector, management and cabinet.
DC Quick charging station offers Electric Vehicle owners an opportunity to charge their car safely and quickly. A typical electric car with 24kWh battery pack may be charged as quickly as 20 minutes to get up to 80% of its capacity.
For example,
We know Nissan Leaf battery capacity is 24KWH,
if you use our 20KW EV charger,
1,it needs 24KWH/20KW=1.2hour=72minutes from 0% to 100%.
2,if you use our 40KW EV charger,
it needs 24KWH/40KW=0.6hour=36minutes from 0% to 100%.
different output power of EV charger, different charging speed.
The Charger combines industry standardization with advanced charging technology to support next-generation electric vehicles. Seamless integration with several payment & billing platform solutions enable easy and secure payments via station payment terminals and RFID card.
Structure Diagram:
System Technical Data:
Input parameter
| Item | rated value | range | Remark |
input voltage | three phase 380Vac | 305~520 Vac | ±20% |
| input frenquency | 50Hz | 45~55Hz | / |
| power factor | ≥ 0.99 | / | / |
| current harmonics | ≤ 5% | / | / |
| inrush current | ≤ 30A | / | Cold boot |
Output parameter
| Item | rated value | range | remark |
overvoltage protection | 470v | ±5V | |
overcurrent protection | 20A | ±2A | |
short circuit protection | / | / | When the output short circuit, and fault alarm indicator |
Over temperature protection | > 85℃ | / | When temperature > 85 ℃, the machine goes into automatically protection state and fault lights and can be automatically restored after temperature lift and power can be set according to the temperature rise |
Main Screen:
Module efficiency graph
We know efficiency is an important parameter in energy saving . The power is more large, and then if the efficiency will increase each 1%, most significant here is saving energy and economic returns. There formula: power consumption = charger output power / charger efficiency.
Figure shows, assuming the charger module total power 200kw, charging 10h per day, and load 50% , if the difference between the charging efficiency of 3%, please see as below: 93% efficiency: power consumption = 200Kw*10h/93%=2150 kw·h 96% efficiency: power consumption = 200Kw*10h/96%=2083 kw·h So, it saved 67 kw·h Assumed electricity bill is 1 RMB / kw·h , you can get a year Saving and economic returns: Saving bills=67(kw·h)*365(Day)*1(RMB)=RMB24455(US$3989)
Customer installation photos:
Certification:
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier