10kg torque servo For Smart Robot Feetech SCS09
10kg torque servo
SCServo 10kg Smart Robot Servo Arduino Feetech SCS09
FT-SCServo is meaning that Smart Control Servo was R&D and manufactured by FEETECH
SCServo can work at servo mode and wheel mode.
The servo mode can be used to multi-joints robot since the robots can be controlled with specific angles. (The factory default settingis servo mode)
The wheel mode can be used to wheel-type operation robots since motors of the robots spin infinitely. (If wheel mode is available you need to program the value of position limitation the both are 0.)
If you want to reprogram servo, you need to download the PC software (SCServo_Debug), and to connect SCPC-2(Serial Control Programming Card) between servo and PC.
More about SCServo_Debug and SCPC-2 introduce please reference its instructions.
SCServo has a unique ID number to identify on BUS network.
The range from 0 to 253 (0xFD) can be used (The factory default settingis ID 1), and, especially, 254(0xFE) is used as the Broadcast ID. If the Broadcast ID is used to transmit Instruction Packet, we can command to all SCServo.
After programmed servo ID, to be best way is written it on the sticker of servo. If not, maybe you will forget the ID when you programmed many servos.
SCServo have kinds of baud rate available.
The baud rate from 38400 bps to 1M bps can be used
They are 38400, 57600,76800,115200,128000,250000,500000,1000000. (The factory default setting is 1000000 bps)
SCServo can feedback the value of Position, Temperature, Load, Speed and Input Voltage.
Also we can reprogram the speed of rotation, the max output torque, operating voltage limit, and operating temperature limit etc.
SCServo is easy to be controled by Arduino.
Arduino library SCServo
Connection to UART
Hardware Specifications
|
SKU |
FT-SCS09 |
FT-SCS15 |
|
Dimensions |
40.0X20.0X40.5mm |
40.0X20.0X40.5mm |
|
Weight |
56g(1.98oz) |
56g(1.98oz) |
|
Gear Type(Ratio) |
Metal(217:1) |
Metal(275:1) |
|
Bus Interface |
TTL Level Multi Drop |
TTL Level Multi Drop |
|
Position Sensor |
Potentiometer |
Potentiometer |
|
Operating Angle |
200°(Servo Mode) |
200°(Servo Mode) |
|
Control System |
Bus Packet Communication |
Bus Packet Communication |
|
Protocol Type |
Half duplex Asynchronous Serial Communication |
|
|
ID |
254 ID (0~253) |
254 ID (0~253) |
|
Communication Speed |
38400bps ~ 1 Mbps |
38400bps ~ 1 Mbps |
|
Feedback |
Position, Temperature, Load, Speed, Input Voltage |
|
|
Motor Type |
Carbon |
Carbon |
|
Bearing Type |
2BB |
2BB |
|
Operating Voltage |
6V~8.4V |
6V~8.4V |
|
Stall Torque(Kg.cm) |
10(6V) |
15(6V) |
|
Stall Current(A) : |
1.5A(7.4V) |
1.5A(7.4) |
|
Operating Speed(RPM) |
80(6V) |
55(6V) |
|
Connector(Wire Length) |
3P&5264 (15cm) |
3P&5264 (15cm) |
|
Stall torque is the maximum instantaneous and static torque Stable motions are possible with robots designed for loads with 1/5 or less of the stall torque |
||
Full Packaged
-Servo×1pc
-Servo accessories x 1bag
Shipping
We adopt EXW term. Generally, we choose, DHL, FedEx, EMS or UPS as our forwarder. Of course, you can choose your own most favorable forwarder, and we would provide the freight bill according to the quantity and weight of the total products, Freight Collect can also be acceptable
our servos is very competitive and sell well on the market this year.We have some new products online now,I am sure you could make money on it.So introduce it for you
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier