10kg 30kg 50kg 130kg 150kg 500kg Vacuum melting equipment for nickel copper stainless steel

10kg 30kg 50kg 130kg 150kg 500kg Vacuum melting equipment for nickel copper stainless steel

Furnace Body Cover: Double layer water cooling arched cover.
The cover in vertical body have two tension spring for balance the weight and easy open the cove. When the cover closed, the two springs also can provide the well sealing pressure for ensuring the good vacuum. But The cover in horizontal type body is adopt the rotation press locking device. The furnace door is side open.

Electrode device:The electrode device at left side of furnace body, it can be both as electrode to power supply to the induction heater, and also as a fulcrum shaft to the induction heater and crucible.The electrode installed on sealing sewing bearing. When the crucible need to tilting, It can go through and operated the hand shank on the bearing to make the metal liquid pour out.

Alloy feeder: The alloy feeder have six cases, which can feed the material under the situation of vacuum or atmosphere protection. Turning to 60 degree of hand wheel, there have one case material fall into the skip bucket, and skip bucket have damping plate, which can let the material falling slow.

Inspection window: There have a inspection window on furnace cover for checking the melting situation. The window have a activity sunshade, opened at short time when plan to see with operated by the handle at outside cover. So it closed at normal time for avoid burning crush by the heat energy and polluted by the metal liquid gas.

Induction heater: The induction heater coil made by rectangle copper, and installed on the electrode. The interior of coil can be putted the molding crucible.

Temperature measuring device: The temperature measuring device installed on suction pipe at right side of furnace body.When plan to measure the temperature, please pulling up the spring cotter and rotated the operation handle to make the end of thermocouple into the metal liquid. (The thermocouple and quartz protection pipe prepared by the client). If the client want to use the infrared temperature measurement, we also can design a position for it

Please link our website:

http://www.cdoinduction.com/vacuum-induction-melting-furnace/

to get more useful information
Skype : mandymeina
 Cell phone : 0086-15168765707

Q:Are you a factory?

A:Yes,We are China leading  melting  furnace manufacturer ,and has exported over to 100 countries.We have powerful R&D team and manufacturing facility.

Q:What kind of machine  do you have?

A:1. Induction Melting Funaces

2. Steel Billet Continuous Casting Machine

3. Rolling Mill

4. Foundry Furnace

5. Copper Melting Funace

6. Copper Rod/Pipe Casting Machine

8. Vacuum Induction Melting Furnace

9. Gold Melting Furnace

10. Jewelery Casting Machine

11. Heat Treatment Oven

12. Mesh Belt Continuous Heat Treatment Oven

Q:Do you have customization or OEM service ?

A:We can provide the regular and standard model sizes, at the same time, we can customize furnaces as product ,work piece size, and temperature requirement .Meanwhile, we offer OEM service under the strict industrial standard.

Q:What kind of quality standard dose your furnace follow?

A:Firstly, we are ISO9001:2008 and CE certified factory, All the processes are strictly following the standard of the metallurgy process. In the factory, we have about 10 employees that work in the quality assurance department. We control the furnace quality in our factory as below:

1st step : Internal inspection (such as the supply chain management

,in-process quality control and final quality assurance which are executed by our QC engineer according to the technical contract)

2nd step: Pre-acceptance standard (buyer send engineers to check or entrust the third party to do in our factory,)

3rd step: Site acceptance(After the installation of vacuum furnace in user’s factory, we sign the reception report )

Q: Is it hard to operate &maintain?

A:Our furnace has the PLC controller and intelligent programmable temp. Controller, user can use touch screen to set curves, auto/manual switch interlock, auto &monitor system, it is easy to operate. We prepare enough spare parts for user and on line technical support.

Q:Can you serve customer oversea like installation and debugging ?

A:Yes,we can dispatch our engineer to your city for installation and debugging or other service. Meanwhile,we will offer relevant documents: The plan of equipment, Foundation condition graph, The layout of equipment, Electric control system schematic diagram, Main accessories operating instructions & qualification and on.

Q:How about training ?

A:Buyer sent operator to our factory to get trained about the furnace operation; Our engineers offer training in the users working site.

Q:What about payment terms?

A:L/C, T/T, and so on.

Q:How long is your furnace warranty period ?

A:Since passing the site acceptance ,it has 12 months warranty period .

Q:How to get quick quotation from us?

A:Please offer us the treating material, the work piece size, max. Temperature, heating zone dimension, vacuum degree and other special requirement. Then we can quote you ASAP.