Emulsifying tank | ||||
Full volume | 20L | |||
working capacity | 4-16L | |||
Configuration on tank cover | Led Light ,Sight window , vacuum inlet , Material inlet , Standby inlet ,Vacuum pressure meter | |||
Emulsifying tank | Inner layer | Material: Stainless steel SS316 | ||
Thickness: 4mm | ||||
Mirror polish | ||||
Middle layer | Material: Stainless steel SS304 | |||
Thickness: 3mm | ||||
Outside layer | Material: Stainless steel SS304 | |||
Thickness: 3mm | ||||
Mirror polish | ||||
With Temperature Sensor (0-199℃) | ||||
With Electrical heating device (Heating power:2KW ) | ||||
With Jacket layer heating/cooling water inlet port and outlet port | ||||
Stirring system | Homogenizer | Material: Stainless steel SS316 | ||
Motor Power: 1.5KW | ||||
Speed: 0-2800 rpm(Frequency conversion control) | ||||
Frame stirrer , Blade stirrer, Scraper | Stirrer Material: Stainless steel SS316 | |||
Scraper Material: PTFE | ||||
Motor Power:0.75KW | ||||
Speed:0~65 r/min(Frequency converter control) | ||||
Safety Protection: 1. During stirring, the tank cover can’t open, 2. During lifting, stirrers can’t run. | ||||
Oil phase tank and water phase tank | ||||
Water phase tank | Material | Inner Layer : SS316 Thickness:4mm | ||
Outer Layer: SS304 Thickness:3mm | ||||
Full Volume | 15L | |||
Working Capacity | 12 L | |||
Stirring method | Dispenser stirrer | |||
Stirring motor power | 0.55 KW | |||
Stirring speed | 1200 rpm | |||
Electrical heating power | 2KW | |||
Oil phase tank | Material | Inner Layer : SS316 Thickness:4mm | ||
Outer Layer: SS304 Thickness:4mm | ||||
Full Volume | 10L | |||
Working Capacity | 8L | |||
Stirring method | Dispenser stirrer | |||
Stirring motor power | 0.55 KW | |||
Stirring speed | 1200 rpm | |||
Electrical heating power | 2KW | |||
4. Other Configurations | ||||
Vacuum system | Vacuum pump: 1.5KW, The maximum vacuum degree is -0.09Mpa | |||
Heating method | Jacket layer by electrical heating | |||
Lift system | Control by motor | |||
Discharge method | Discharge from bottom valve or Overturn Emulsifying tank | |||
Control way | Button control | |||
Dimension (L*W*H) | 1200mm*780mm*1700mm | |||
Pipeline connection way | CLAMP connection (Easy to installation and disassembly) | |||
Sealing material | VITON | |||
Welding | All welding parts are full weld. | |||
Spare parts | One year spare parts and tools |