HDMI Over Ethernet is a device based on the standard TCP/IP protocol for transmitting HD audio and video source over LAN . It transmits your HD display with the high resolutions up to 120 meters away from your HDMI or DVI-D source by using one CAT5e/6 cable. At the same time, it’s also convenient to transmit HDMI audio and video source by point-to-point, multipoint-to-multipoint and cascade connection mode.
Features:
Support HDMI1.3/HDCP1.1&1.2
Support point-to-point mode, multipoint-to-multipoint mode and cascade connection mode.
Standard 802.3 Ethernet
Support one way IR extension.
Pure hardware design, plug and play, do not need to install additional software
Support IR extender function allows IR remot control of Source devices from remote viewing location by
sending IR commands received in the vicinity of the Display back to the Source devices.
Audio format support : DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
No loss of quality
Installs in minutes
Need DC5V/1A power supply for each box
Operating and Connecting:
1.Connect one HDMI cable up to 20 meters between source device and TX Extender
2.Connect one HDMI cable up to 20 meters between sink device and RX Extender
3.Connect Single cat-5e or cat-6(recommended) cables up to 120 meters instead of HDMI cables between TX and RX Extender
4.Connect 5V power supply to the HDES02-M Extender
SPECIFICATIONS: HDES02-M
HDTV Resolutions | 480p,720p,1080p |
Audio | Sample rate:32kHz,44.1kHz,48kHz |
IR remote control | 38kHz;NEC |
HDMI | HDMI 1.3 |
HDCP | HDCP 1.2 |
Power adapter | DC5V/1A |
Power consumption | HDMI Sender:3W HDMI receiver:3W |
Size(L-W-H) | 92x79x28mm |
Weight | 240g x 2 |
Operating Temperature/Humidity | 0℃-70℃/10%-80%RH(no condensation) |
Storage Temperature/Humidity | -10℃-80℃/5%-90%RH(no condensation) |
3.Package Contents
Before attempting to use this unit, please check the packaging and make sure the
following items are contained in the shipping carton:
one piece of HDMI transmitter
one piece of HDMI receiver
Two pieces of DC 5V power supply
User’s Manual
4.Physical interface diagram
HDMI Transmitter
Port | Function |
DC/5V | Supply power for the transmitter |
RESET | Hold down the key,the model will re-start |
IR-TX | Connect IR transmitter to this port |
HDMI IN | Connect HDMI source to this port |
UTP OUT | Cat5e/6 cable out |
SET | Setting TX match with RX, it has 16 choices via 4 DIP codes
|
HDMI Receiver
Port | Function |
DC/5V | Supply power for the receiver |
RESET | Hold down the key,the model will re-start |
IR-RX | Connect IR receiver to this port |
HDMI OUT | Connect HDTV to this port |
UTP IN | Cat5e/6 cable in |
SET | Setting TX match with RX, it has 16 choices via 4 DIP codes
|
6.Application diagrams
Application 1: point to point application
Application 2: multipoint to multipoint application
Note: For multipoint to multipoint application, please choose the gigabit switch with IGMP Multicast function and three layers protocol
++Return Policy++
++FEEDBACK AND DETAILED SELLER RATINGS++
Dear buyers, we appreciate your business, if you are satisfied with our service, please leave us a positive feedback and rate the details of the transaction .When you rate the shipping time part please take international transit into consideration. Your recognition will make us more confident to develop business and serve you better.
Our goal is to make sure you are a happy buyer and pleasant shopping with us. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem.We will do our best to serve you!Thank you!
Thank you for your support!Welcome to buy from us!
1080p HDMI extender 120m network matrix 16x16 over Ethernet via cat 5e/6 cable