Item | Description | ||
Model | M52A | ||
OS | Linux3.18 | ||
Operating | Cell phone APP, PC client, Remote controller,UI | ||
Functions Summary | Preview, recording, playback, network transmission, positioning, AI analysis, multiple sensor data acquisition. | ||
Video and Preview | Video Input, Output, Signal standard | AHD input:4ch ahd, 1ch ADAS, 1ch DSM and 1-2 IPC Output: 1ch CVBS/VGA Signal standard:1.0Vp-p, 75Ω, NTSC/PAL optional | |
Image Identification | 1ch ADAS, 1ch DSM | ||
OSD | Character superposition function, information superposition of time and date, device ID and GPS, alarm,etc. | ||
Video Compression Format | Compression coding. Applying H.265 hi-performance processor(Hisilicon 3521D). | ||
Image quality | Code stream, frame rate optional | ||
Preview | 1/4/6 channel preview | ||
Frame rate | 1080p: max 120fps/s. 720p: 240fps/s, each channel max 30fps/s. NTSC: 240fps/s, each channel max 30fps/s. | ||
Resolution | 1080p,720p D1 optional. | ||
Audio | Audio Input, Output | 4ch audio input, 1ch audio output. Independent intercom | |
Compression Format | G.711, G.726 | ||
Recording | Storage Medium | Supporting one 2.5” SATA hard drive(max 2TB) and one SD card(max 256GB) | |
Video Strategies | Recording at start up by default, supporting timed recording, recording triggered by alarm and event, as well as manual recording | ||
Alarm pre-recording | 0-60min | ||
Alarm recording delay | 0-30min | ||
Playback channel | Support local 1/4/6/8 channel playback | ||
Browse mode | Time, channel, event. | ||
Communication Ports | RS232, RS485 | ||
ADAS | Built-in | ||
Wireless Transmission | 3/4G/5G wireless transmission module, EVDO/TD-SCDMA/WCDMA/TDD-LTE/FDD-LTE ect. Wi-Fi module, 802.11b/g/n,2.4G/5.8G optional. Ethernet: Network aviation head(100M) | ||
Position | GPS/BD: Positioning, speed detection, time synchronization | ||
Power Supply and Power Consumption | Power Supply | ≤6V ,ACC on; ≥7.5V ,ACC off | |
Input Voltage | DC:+8V ~ +36V. If voltage is lower than 8V or is higher than 36V for a long time. The device automatically shuts down and enters the protection mode. | ||
Output Voltage | +12V@1A; +5V@1A | ||
Power Consumption | Max 30W consumption, about 10W in standby mode | ||
Built-in UPS | 5x7F*2.7V | Power on and charge, full for 3 minutes. External power loss, can keep the system working for 7 seconds, finish saving data. | |
Operating Environment | Temperature | preheating: -20℃ ~ +70℃ | |
Humidity | 8% to 90% | ||
Dimensions | 177 (L)x 186.8(W) x 54(H) | ||
Weight | Net: 1.25KG |