100W Single Output Switching Power Supply RS-100-12 Enclosed Meanwell LED 12 0 12 Volts Transformer
100W Single Output Switching Power Supply RS-100-12 Enclosed Meanwell LED 12 0 12 Volts Transformer
Universal AC input / Full range
Protections: Short Circuit / Over Current / Over voltage / Over temperature
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
No load power consumption<0.5W
All using 105 °C long life electrolytic capacitors
Withstand 300VAC surge input for 5 second
High operating temperature up to 70 °C
Withstand 5G vibration test
High efficiency,long life and high reliability
3 years warranty
| Model | RS-100-12 | |
| OUTPUT | DCVOLTAGE | 12V |
| RATEDCURRENT | 8.5A | |
| CURRENtrANGE | 0 ~ 8.5A | |
| RATEDPOWER | 102W | |
| RIPPLE&NOISENOTE.2 | 120MVP-P | |
| VOLTAGEADJ.RANGE | 11.4 ~ 13.2V | |
| VOLTAGETOLERANCENOTE.3 | ±1.0% | |
| LINEREGULATION | ±0.5% | |
| LOADREGULATION | ±0.5% | |
| SETUP. RISE.TIME | 500ms,30ms/230VAC , 1200ms, 30ms/115VAC at fill load | |
| HOLD TIME (Typ.) | 100ms/230vac 18ms/115vac at full load | |
| INPUT | VOLTAGERANGE | 88~264VAC 125~373VDC (Withstand 300VAC surge for 5sec. Without damage) |
| FREQUENCYRANGE | 47~63HZ | |
| EFFICIENCY | 81% | |
| AC CURRENT | 2.5A/115VAC 1.5A/230VAC | |
| INRUSH CURRENT | Cold start 40A/230VAC | |
| LEAKAGECURRENT | <2mA/240VAC | |
| PROTECTION | OVERLOAD | 110-150%rated output power |
| Protection type:Hiccup mode,recovers automatically after fault condition is removed | ||
| OVER VOLTAGE | 13.8 ~ 16.2V | |
| Protection type: Hiccup mode,recovers automatically after fault condition is removed | ||
| ENVIRONMENT | WORKINGTIMP | -25 ~+ 70 °C (Refer to "Derating Curve") |
| WORKINGHUMIDITY | 20~90% Rhnon-condensing | |
| STORAGE TEMP HUMIDITY | -40~+85 °C ,10~95%RH | |
| TEMPCOEFFICIENT | ±0.03%/ °C (0~50 °C ) | |
| VIBRATION | 10~500HZ,5G 10min/1cycle period for 60 min each alongX,Y,Zaxes | |
| SAFETY&EMC | SAFETYSTANDARDS | UL60950-1 TUV EN 60950-1 Approved |
| WITHSTAND VOLTAGE | 1/P-0/P:3KVAC 1/P-FG:2KVAC 0/P-FG:0.5KVAC | |
| ISOLATIONRESISTANCE | 1/P-0/P,1/P-FG,0/P-FG:100M Ohms/500VDC/25 °C/70RH | |
| EMI CONDUCTICN& RADIATION | Compliance to EN55022(CISPR22) ClassB | |
| HARMONICCURRENT | Compliance to EN61000-3-2,-3 | |
| EMS IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11,EN61000-6-2 (EN50082-2),heavy industry leve criteriaA | |
| QTHERS | MTBF | 260.8Khrs min MIL-HDBK-217F(25 °C ) |
| DIMENSION | 159.9*97*38mm(L*W*H) | |
| PACKING | 0.6Kg; 24pcs / 15.4Kg / 0.7CUFT | |
| NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 °C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” 7.Length of set up time is measured at cold first start.Tuming ON/OFF the power supply very quickly may lead to increase of the set up time. | |
1.Q:Can I have a sample order firstly ? what's your MOQ limit?
A: Yes, sample order is acceptable. And we do not have MOQ limi.
2.Q:What's about the lead time and shippment?
A: For common type like APV LPV HLG ELG LRS DR MDR series, we have enough stock. Sample Order can be delivered within 2 days, Bulk Order can be delivered within 2~7 days after payment, not common type need 10~35 days after payment, for detail lead time, please contact our sales.
For shipping, we often use DHL, FedEx, UPS, and TNT. And they take 3-5 days to arrive. For bulk order, we recommend to send goods by Air or by Sea to save your transportation cost.
3.Q:How does your factory do regarding quality control?
A: Quality is priority.We always attach great importance to quality controlling for to the very end.Our factory has gained UL,ENEC,PSE,CCC,CB,CE,ErP,SAA etc authentication.
1. What we sell is 100% Genuine Mean Well Power Supply.
2. We are distributors and manufacturers in China.
3.Alibaba assessed 7 years Gold Supplier and 18 years of industry experience.
4.Inspected by the inspection Institution of Bureau Veritas Certification.
5.Price is negotiable if you have large quantity demand
6.100% QC inspection Before Shipping.
7.Best Quality & Best Service with Competitive price.
8.Shipping will be the most economical for you and freight cost is informed in advance for your consideration.decision for the shipping terms will be made according to your requirements.
Our Service:
Faster Response/Delivery:
17 hours customer service available from Monday to Saturday, 1-3 days complete sourcing requirements, finish OEM/ODM projects evaluation in one week.
We accept different payment method:
Alibaba Trade Assurance, T/T(30% before production, 100% when delivery),D/P,D/A, Western union, L/C, paypal,Escrow,Moneygram
Send your Inquiry Details in the Below,Click "Send" Now!
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier